Ubiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
$194.99
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
Related Products
Related products
-
Wifi Extenders & Access Points
Ubiquiti Access Point WiFi 6 In-Wall
0 out of 5(0)Hardware
Networking interface:
(1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
Management interface:
Ethernet
Bluetooth
PoE interface:
(1) PoE in (PoE output not used)
(1) PoE out (Requires a PoE+ switch)
Power method:
PoE
PoE+ (Required for PoE output)
Power supply
UniFi PoE switch
48V, 0.5A PoE adapter (Optional)
Max. power consumption: 13.5W (Excluding PoE output)
Max PoE wattage per port by PSE
15.4W*
*Requires a PoE+ switch
Voltage range PoE mode
44?57V DC
Max. TX power
2.4 GHz: 22 dBm
5 GHz: 26 dBm
6 GHz: –
MIMO
2.4 GHz: 2 x 2 (UL MU-MIMO)
5 GHz: 4 x 4 (DL/UL MU-MIMO)
6 GHz:
Throughput rate
2.4 GHz: 573.5 Mbps
5 GHz: 4.8 Gbps
6 GHz
Antenna gain
2.4 GHz: 5 dBi
5 GHz: 5.9 dBi
6 GHz:
LED: White/blue
Button: Factory reset
Mounting: Wall (Included)
Ambient operating temperature: -30 to 60? C (-22 to 140? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11a/b/g/n/ac/ax
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero-wait DFS:
Yes*
*Supported with upcoming firmware versions.SKU: UBIQUITI-U6-IW-US$307.99 -
Wifi Extenders & Access Points
TP Link – RE105 300Mbps Wi-Fi Range Extender
0 out of 5(0)Eliminate Wi-Fi dead spots from your home by plugging the TP-Link RE105 300 Mb/s Single-Band Wi-Fi Range Extender into an available wall outlet. This compact range extender repeats the 802.11n Wi-Fi signal from your router to provide up to 300 Mb/s of speed to connected wireless devices for smooth video streaming, online games, video chats, and more. The RE105 can also be configured to work as a wireless access point by connecting its 10/100 Mb/s Ethernet port to a compatible wired network switch or router. You can quickly set up and configure the access point using the TP-Link Tether app or by pressing the Wi-Fi Protected Setup (WPS) buttons on the device and a compatible router to pair them.
Extended Wi-Fi Coverage
Featuring two powerful external antennas and 802.11n support, the RE105 plugs into a wall outlet to help increase your Wi-Fi coverage, transferring up to 300 Mb/s over the 2.4 GHz frequency when paired with a compatible router.Efficient Wi-Fi
MU-MIMO technology allows the router to simultaneously send and receive data from multiple devices.Access Point Mode
The TP-Link RE105 can be configured to work as a wireless access point when its 10/100 Mb/s Ethernet port is connected with a compatible network switch or router.Easy Configuration
Quickly set up and manage your network using the TP-Link Tether app. The app also allows you to monitor the state of the range extender. Alternatively, you can simply press the WPS buttons on the extender and a compatible router to pair them.Network Security
Your network is secured with 64/128-bit WEP, WPA/WPA2, and WPA/WPA2-PSK encryptions.SKU: TP LINK - RE105$71.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-AC-HD-US Access Point AC HD
0 out of 5(0)The UAP-AC-HD-US Wave 2 Enterprise Wi-Fi Access Point from Ubiquiti Networks is a scalable enterprise access point solution designed to be easily deployed and managed. It supports the 802.11ac Wave 2 Wi-Fi standard with speeds of up to 1733 Mbps in the 5 GHz radio band, and up to 800 Mbps in the 2.4 GHz radio band. The Wi-Fi system offers simultaneous dual-band operation with 4×4 MIMO technology for each band. Install the UAP-AC-HD-US access point inside or outdoors (covered) using the included wall or ceiling mount kits. Once installed, the dual PoE compliant Gigabit Ethernet ports make it easy to connect the AP to the network without the need for a standalone power source.
The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.
UniFi Controller
View Your RF Environment
Use the RF environment functionality of the UniFi AC HD AP to detect and troubleshoot nearby interference, analyze radio frequencies, choose optimal AP placement, and configure settings.Power RF Performance
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.Guest Portal/Hotspot Support
Easy customization and options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi’s rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.All UniFi APs include Hotspot functionality:
– Built-in support for billing integration using major credit cards
– Built-in support for voucher-based authentication
– Built-in Hotspot Manager for voucher creation, guest management, and payment refund
– Full customization and branding of Hotspot portal pagesMulti-Site Management
A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts.WLAN Groups
The UniFi Controller can manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP’s radio. Each WLAN can be VLAN tagged. Dynamic VLAN tagging per Wi-Fi station (or RADIUS VLAN) is also supported.802.11ac Technology
MU-MIMO
Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.4×4 Spatial Streams
At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
– four 1×1 clients
– two 2×2 clients
– one 2×2 client and two 1×1 clients
– one 3×3 client and one 1×1 client
A 4×4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3×3 in both radio bands.Client Compatibility
The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance than a typical Wave 1 AP.Hardware
Easy Mounting
Its sleek design seamlessly integrates into any environment (all accessories included) and is compatible with existing UAP-AC-PRO mounts.LED
Unique LED provisioning ring provides administrator location tracking and alerts for each device.Dual-Gigabit Ethernet
Unique LED provisioning ring provides administrator location tracking and alerts for each device.Enhanced Processing Power
The UniFi AC HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE)
Includes PoE functionality. Each single-pack includes a PoE adapter.PoE Standard
The UniFi AC HD AP is compatible with an 802.3at PoE+ compliant switch.SKU: UBIQUITI - UAP-AC-HD-US$483.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-FlexHD-US Access Point FlexHD
0 out of 5(0)Small and weatherproof, the UniFi FlexHD Access Point from Ubiquiti Networks is a Wave 2 access point with 4×4 MU-MIMO technology. Utilizing Wi-Fi 5 (802.11ac) technology, the FlexHD can use 5 GHz (for up to 1.7733 Gb/s) and 2.4 GHz (300 Mb/s) frequency bands indoors and outdoors thanks to its weatherproof design. The FlexHD can be mounted in a variety of ways, such as on a tabletop, wall, or a pole. The FlexHD also works with the UniFi Network Controller, allowing for scalability. This means it can be used to build wireless networks as big or as small as needed, all in a unified management system.
Wi-Fi 5 (802.11ac)
Utilizing Wi-Fi 5 (802.11ac) MU-MIMO technology, the FlexHD can communicate with multiple clients at the same time, which significantly increasing multi-user throughput and improving overall user experience.MU-MIMO
As a Wave 2 AP, the FlexHD provides increase wireless performance and/or serves more clients over a Wave 1 AP. A 4×4 Wave 2 AP delivers data to up to 33% more clients than a Wave 1 AP that is 3×3 in both 2.4 GHz and 5 GHz frequency bands.UniFi Network Controller
The FlexHD is scalable with the UniFi Network Controller. You’ll be able to manage UniFi devices, map out networks, manage system traffic, and more.Flexible Mounting Options
The FlexHD supports a variety of mounting options, such as tabletop, wall, pole, and even ceiling (ceiling mount available separately).SKU: UBIQUITI - UAP-FLEXHD-US$307.99
There are no reviews yet.