Ubiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
$194.99
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
Related Products
Related products
-
Wifi Extenders & Access Points
Ubiquiti Access Point WiFi 6 In-Wall
0 out of 5(0)Hardware
Networking interface:
(1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
Management interface:
Ethernet
Bluetooth
PoE interface:
(1) PoE in (PoE output not used)
(1) PoE out (Requires a PoE+ switch)
Power method:
PoE
PoE+ (Required for PoE output)
Power supply
UniFi PoE switch
48V, 0.5A PoE adapter (Optional)
Max. power consumption: 13.5W (Excluding PoE output)
Max PoE wattage per port by PSE
15.4W*
*Requires a PoE+ switch
Voltage range PoE mode
44?57V DC
Max. TX power
2.4 GHz: 22 dBm
5 GHz: 26 dBm
6 GHz: –
MIMO
2.4 GHz: 2 x 2 (UL MU-MIMO)
5 GHz: 4 x 4 (DL/UL MU-MIMO)
6 GHz:
Throughput rate
2.4 GHz: 573.5 Mbps
5 GHz: 4.8 Gbps
6 GHz
Antenna gain
2.4 GHz: 5 dBi
5 GHz: 5.9 dBi
6 GHz:
LED: White/blue
Button: Factory reset
Mounting: Wall (Included)
Ambient operating temperature: -30 to 60? C (-22 to 140? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11a/b/g/n/ac/ax
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero-wait DFS:
Yes*
*Supported with upcoming firmware versions.SKU: UBIQUITI-U6-IW-US$307.99 -
Wifi Extenders & Access Points
TP Link – RE220 AC750 WiFi Range Extender
0 out of 5(0)Boost the range of your Wi-Fi router or add wireless functionality to your existing wired network with the AC750 Dual-Band Wi-Fi Range Extender from TP-Link. Capable of up to 750 Mb/s of total Wi-Fi data throughput, the AC750 wireless extender plugs into a standard wall outlet, and it comes equipped with three internal antennas and a Fast Ethernet port.
The AC750 extender boosts the range of your Wi-Fi network by piggybacking onto the signal of your existing wireless router. You can connect the extender to your router using the TP-Link Tether app for iOS and Android, or you can use one-button WPS (Wi-Fi Protected Setup) setup if your router supports WPS. An indicator light on the extender lets you know when the device is placed in an optimal location. You can also use the extender as a wireless access point for an existing wired network.
Boost Your Wi-Fi to Hard-to-Reach Areas
Place the RE220 between your wireless router and wireless devices, expanding Wi-Fi coverage while minimizing Wi-Fi dead zones. Dual-band Wi-Fi can reach speeds up to 750 Mb/s and extends wireless range up to 3200 ft2.Stable Dual-Band Connection for More Devices
Dual 2.4 GHz and 5 GHz bands provide Wi-Fi connections for up to 32 devices, helping to deliver a stable experience on all your devices.Simple Two-Step Setup
First, press the WPS button on your compatible router and RE220 to easily connect the extender to the network, or connect the extender via the Tether app or web interface if your router doesn’t support WPS. Next, relocate the extender to a better location for optimal Wi-Fi coverage with the help of the smart signal indicator light.An Access Point and Wireless Adapter
The Ethernet port of RE220 can turn your wired internet connection into a wireless access point. It can also function as a wireless adapter to connect wired devices.High Speed Mode for Maximized Performance
High Speed Mode uses one dedicated Wi-Fi band as backhaul and another dedicated Wi-Fi band as an access point to maximize the bandwidth on the extender’s Wi-Fi.Compatibility
The RE220 is compatible with most Wi-Fi routers and access points, making it easy to expand and strengthen your Wi-Fi network.Smart Management by Tether App
Set up and manage your Wi-Fi using the TP-Link Tether app for iOS and Android.SKU: TP LINK - RE220$81.99 -
Wifi Extenders & Access Points
Ubiquiti – LocoM5(US) UISP airMAX NanoStationM 5 GHz loco Station
0 out of 5(0)With the 5 GHz airMAX NanoStationlocoM from Ubiquiti Networks, you can provide your clients with reliable long-range network connections. Designed to support both Point-to-MultiPoint (PtMP) and Point-to-Point (PtP) configurations, this Customer Premises Equipment (CPE) loco station features a panel antenna with dual-polarity 13 dBi gain to communicate with wireless devices over the 5 GHz signal band frequency. It also includes a 560 MHz Atheros MIPS 74Kc processor with 64MB of DDR2 memory and 8MB of flash storage, which can all be powered by connecting the included power-over-Ethernet (PoE) adapter to the 10/100 Mb/s Ethernet port to carry both data and power over a single cable. With its UV-stabilized plastic enclosure, the airMAX NanoStationloco M2 may be attached onto a pole with the included mount. Use the airOS software to configure and manage the airMAX NanoStationlocoM and its connected devices.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) 10/100 MbE RJ45 port
Power method: Passive PoE (Pairs 4, 5+; 7, 8 return)
Power supply: PoE, 24V, 0.5A
Max. power consumption: 5.5W
Ambient operating temperature: -30 to 75? C (-22 to 167? F)
Ambient operating humidity: 5 to 95% noncondensing
Shock & vibration: ETSI300-019-1.4
Certifications: FCC, IC, CE, RoHSSystem
Frequency: 5 GHz
Operating frequency:
– Worldwide: 5170-5875 MHz
– US: 5725-5850 MHz
– USA DFS: 5250-5850 MHz
Gain: 13 dBi
Cross-pol isolation: 20 dB Min.
Max. VSWR: 1.4:1
Beamwidth: 45? (H-pol) / 45? (V-pol) / 45? (Elevation)
Polarization: Dual linearSKU: UBIQUITI - LOCOM5(US)$97.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-AC-HD-US Access Point AC HD
0 out of 5(0)The UAP-AC-HD-US Wave 2 Enterprise Wi-Fi Access Point from Ubiquiti Networks is a scalable enterprise access point solution designed to be easily deployed and managed. It supports the 802.11ac Wave 2 Wi-Fi standard with speeds of up to 1733 Mbps in the 5 GHz radio band, and up to 800 Mbps in the 2.4 GHz radio band. The Wi-Fi system offers simultaneous dual-band operation with 4×4 MIMO technology for each band. Install the UAP-AC-HD-US access point inside or outdoors (covered) using the included wall or ceiling mount kits. Once installed, the dual PoE compliant Gigabit Ethernet ports make it easy to connect the AP to the network without the need for a standalone power source.
The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.
UniFi Controller
View Your RF Environment
Use the RF environment functionality of the UniFi AC HD AP to detect and troubleshoot nearby interference, analyze radio frequencies, choose optimal AP placement, and configure settings.Power RF Performance
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.Guest Portal/Hotspot Support
Easy customization and options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi’s rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.All UniFi APs include Hotspot functionality:
– Built-in support for billing integration using major credit cards
– Built-in support for voucher-based authentication
– Built-in Hotspot Manager for voucher creation, guest management, and payment refund
– Full customization and branding of Hotspot portal pagesMulti-Site Management
A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts.WLAN Groups
The UniFi Controller can manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP’s radio. Each WLAN can be VLAN tagged. Dynamic VLAN tagging per Wi-Fi station (or RADIUS VLAN) is also supported.802.11ac Technology
MU-MIMO
Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.4×4 Spatial Streams
At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
– four 1×1 clients
– two 2×2 clients
– one 2×2 client and two 1×1 clients
– one 3×3 client and one 1×1 client
A 4×4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3×3 in both radio bands.Client Compatibility
The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance than a typical Wave 1 AP.Hardware
Easy Mounting
Its sleek design seamlessly integrates into any environment (all accessories included) and is compatible with existing UAP-AC-PRO mounts.LED
Unique LED provisioning ring provides administrator location tracking and alerts for each device.Dual-Gigabit Ethernet
Unique LED provisioning ring provides administrator location tracking and alerts for each device.Enhanced Processing Power
The UniFi AC HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE)
Includes PoE functionality. Each single-pack includes a PoE adapter.PoE Standard
The UniFi AC HD AP is compatible with an 802.3at PoE+ compliant switch.SKU: UBIQUITI - UAP-AC-HD-US$483.99
There are no reviews yet.