Ubiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
$194.99
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
Related Products
Related products
-
Routers, Wifi Extenders & Access Points
TP-Link AC1200 WiFi Router – Dual Band Wireless Internet Router, 4 x 10/100 Mbps Fast Ethernet Ports, Supports Guest WiFi, Access Point Mode, IPv6 and Parental Controls
Routers, Wifi Extenders & Access PointsTP-Link AC1200 WiFi Router – Dual Band Wireless Internet Router, 4 x 10/100 Mbps Fast Ethernet Ports, Supports Guest WiFi, Access Point Mode, IPv6 and Parental Controls
0 out of 5(0)High-Speed Dual Band Wi-Fi for Better Connections
The Archer A54 lets your PC or laptop enjoy connections 3x faster than Wireless N with Wireless AC technology.
With 300Mbps over the 2.4GHz band and 867Mbps over the the crystal clear 5GHz band, the Archer A54 is the
superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.1. Router Mode
Connect to the Ethernet to instantly create a private wireless network and share internet access to all your Wi-Fi devices.
2. Access Point Mode
Transform your existing wired network to a wireless one.
3. Range Extender Mode
Boost the existing wireless coverage in your room.4 Antennas & Beamforming for Maximum Coverage
Equipped with four external antennas, Archer A54 creates stronger and more reliable networks for all to enjoy in your home. Beamforming technology concentrates the Wi-Fi signal towards your connected devices, providing better Wi-Fi range and network performance.Easy Parental Control
Supervise children and staff with responsible access, controlled by parents or administrators. Use key words to easily set up a black list and limit the level of web access.Guest Network Access
Allow guests to join your Wi-Fi network while protecting your privacy. Make sharing easy, maintain security. Captive portal helps maintain only authorized guests to use the network, presenting devices with a convenient, user-friendly authentication method to grant Wi-Fi access. Easily share your facebook account to anyone who connects to your network.Connect More Devices Simultaneously
Archer A54 helps your devices achieve optimal performance by making communication more efficient with MU-MIMO technology. Two simultaneous data streams, allow all connected devices to achieve faster speeds than standard AC routers.Easy Setup and Use
Set up the Archer A54 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.- IPv6 Supported
Future-proof your network with IPv6 (Internet Protocol Version 6) support - IPTV
Improve your IPTV streaming experience with IGMP Proxy/Snooping Bridge and Tag VLAN - LED Control
Easily schedule the LED on or off to your needs, no blinking light disturbing your sleep - Tether APP
Tether APP lets you manage your network settings easily from any Android or iOS device
SKU: TP LINK - ARCHER A54$91.99 - IPv6 Supported
-
Wifi Extenders & Access Points
Ubiquiti Access Point WiFi 6 In-Wall
0 out of 5(0)Hardware
Networking interface:
(1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
Management interface:
Ethernet
Bluetooth
PoE interface:
(1) PoE in (PoE output not used)
(1) PoE out (Requires a PoE+ switch)
Power method:
PoE
PoE+ (Required for PoE output)
Power supply
UniFi PoE switch
48V, 0.5A PoE adapter (Optional)
Max. power consumption: 13.5W (Excluding PoE output)
Max PoE wattage per port by PSE
15.4W*
*Requires a PoE+ switch
Voltage range PoE mode
44?57V DC
Max. TX power
2.4 GHz: 22 dBm
5 GHz: 26 dBm
6 GHz: –
MIMO
2.4 GHz: 2 x 2 (UL MU-MIMO)
5 GHz: 4 x 4 (DL/UL MU-MIMO)
6 GHz:
Throughput rate
2.4 GHz: 573.5 Mbps
5 GHz: 4.8 Gbps
6 GHz
Antenna gain
2.4 GHz: 5 dBi
5 GHz: 5.9 dBi
6 GHz:
LED: White/blue
Button: Factory reset
Mounting: Wall (Included)
Ambient operating temperature: -30 to 60? C (-22 to 140? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11a/b/g/n/ac/ax
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero-wait DFS:
Yes*
*Supported with upcoming firmware versions.SKU: UBIQUITI-U6-IW-US$307.99 -
Wifi Extenders & Access Points
TP Link – RE105 300Mbps Wi-Fi Range Extender
0 out of 5(0)Eliminate Wi-Fi dead spots from your home by plugging the TP-Link RE105 300 Mb/s Single-Band Wi-Fi Range Extender into an available wall outlet. This compact range extender repeats the 802.11n Wi-Fi signal from your router to provide up to 300 Mb/s of speed to connected wireless devices for smooth video streaming, online games, video chats, and more. The RE105 can also be configured to work as a wireless access point by connecting its 10/100 Mb/s Ethernet port to a compatible wired network switch or router. You can quickly set up and configure the access point using the TP-Link Tether app or by pressing the Wi-Fi Protected Setup (WPS) buttons on the device and a compatible router to pair them.
Extended Wi-Fi Coverage
Featuring two powerful external antennas and 802.11n support, the RE105 plugs into a wall outlet to help increase your Wi-Fi coverage, transferring up to 300 Mb/s over the 2.4 GHz frequency when paired with a compatible router.Efficient Wi-Fi
MU-MIMO technology allows the router to simultaneously send and receive data from multiple devices.Access Point Mode
The TP-Link RE105 can be configured to work as a wireless access point when its 10/100 Mb/s Ethernet port is connected with a compatible network switch or router.Easy Configuration
Quickly set up and manage your network using the TP-Link Tether app. The app also allows you to monitor the state of the range extender. Alternatively, you can simply press the WPS buttons on the extender and a compatible router to pair them.Network Security
Your network is secured with 64/128-bit WEP, WPA/WPA2, and WPA/WPA2-PSK encryptions.SKU: TP LINK - RE105$71.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-FlexHD-US Access Point FlexHD
0 out of 5(0)Small and weatherproof, the UniFi FlexHD Access Point from Ubiquiti Networks is a Wave 2 access point with 4×4 MU-MIMO technology. Utilizing Wi-Fi 5 (802.11ac) technology, the FlexHD can use 5 GHz (for up to 1.7733 Gb/s) and 2.4 GHz (300 Mb/s) frequency bands indoors and outdoors thanks to its weatherproof design. The FlexHD can be mounted in a variety of ways, such as on a tabletop, wall, or a pole. The FlexHD also works with the UniFi Network Controller, allowing for scalability. This means it can be used to build wireless networks as big or as small as needed, all in a unified management system.
Wi-Fi 5 (802.11ac)
Utilizing Wi-Fi 5 (802.11ac) MU-MIMO technology, the FlexHD can communicate with multiple clients at the same time, which significantly increasing multi-user throughput and improving overall user experience.MU-MIMO
As a Wave 2 AP, the FlexHD provides increase wireless performance and/or serves more clients over a Wave 1 AP. A 4×4 Wave 2 AP delivers data to up to 33% more clients than a Wave 1 AP that is 3×3 in both 2.4 GHz and 5 GHz frequency bands.UniFi Network Controller
The FlexHD is scalable with the UniFi Network Controller. You’ll be able to manage UniFi devices, map out networks, manage system traffic, and more.Flexible Mounting Options
The FlexHD supports a variety of mounting options, such as tabletop, wall, pole, and even ceiling (ceiling mount available separately).SKU: UBIQUITI - UAP-FLEXHD-US$307.99
There are no reviews yet.