JL Audio – XD-FDBU-2 2-Way MAXI Fused Distribution Block
$39.99
2-Way Fused Power Distribution Block
Designed to split a large wire down to two smaller wires where fusing of the small wires is needed. The input of this block accepts wire from 1/0 to 4 AWG, while the two fused outputs each accept wire from 4 AWG to 8 AWG. OmniSert receptacles capture various size wires without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and cover provide insulation and protection.
Requires two MAXI Fuses, appropriately rated for the equipment being connected. These are sold separately. Fuses can be pulled and inserted without removing the cover.
2-Way Fused Power Distribution Block
Designed to split a large wire down to two smaller wires where fusing of the small wires is needed. The input of this block accepts wire from 1/0 to 4 AWG, while the two fused outputs each accept wire from 4 AWG to 8 AWG. OmniSert receptacles capture various size wires without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and cover provide insulation and protection.
Requires two MAXI Fuses, appropriately rated for the equipment being connected. These are sold separately. Fuses can be pulled and inserted without removing the cover.
Brand
JL Audio
Related Products
Related products
-
Power Connections
JL Audio – XMD-USBCA/CHG2X-PNL USB-C and USB-A Charging Jack for Panel-Mounting
USB-C and USB-A Charging Jack for Panel-Mounting
This panel-mount jack facilitates the creation of a permanent high-power, 5V / 2.1A output charging point for both USB-C and USB-A digital devices. For visual confirmation, a built-in blue LED illuminates whenever power is active. An appropriate USB cable (not included) is required to connect to your device.
This product is designed to be installed on any flat surface up to 1.25-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
SKU: n/a -
Power Connections
JL Audio – XMD-USBCHG/2X-PNL Dual USB Charging Jack for Panel-Mounting
Dual USB Charging Jack for Panel-Mounting
This panel-mount jack facilitates the creation of a permanent high-power, 5V / 2.1A output charging point for USB digital devices. An appropriate USB cable for your device is required to make the charging connection.
This product is designed to be mounted to any flat surface up to 1.25-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
SKU: n/a -
Power Connections
JL Audio – XD-BTS Ultra-Compact Battery Connector, Positive or Negative
Ultra-Compact Universal Battery Connector, Positive or Negative
The tiny size of the XD-BTS battery connector makes it easy for tight-space installations, and ideal for smaller systems that require a single main power wire for the audio system. OmniSert technology ensures secure, high-integrity wire contact in the captured-wire connector for any wire from 10 AWG – 4 AWG. An additional side-mounted power ring provision allows you to connect factory harnesses or an additional power wire, if needed.
The included adaptor collar allows it to be used for negative or positive battery post connections, where the secure clamping design ensures a tight fit to the battery post. Adaptors are sold separately for side-post batteries. Red and black caps are provided so that you can easily mark your battery connection as positive or negative.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate cover provides insulation and protection.
SKU: JL Audio - XD-BTS
