$14.99
Bolt-On Master Ground Lug
The importance of a solid ground connection is paramount in any 12 V installation. Our Master Ground Lug accepts multiple ground wires (with a power ring on each), and bolts securely to the vehicle’s sheet metal, creating a large and secure electrical contact for reduced resistance and optimal performance.
Stainless-steel lug with plated brass contact puck. Aggressive star washers provide maximum “bite” on the sheet metal for a secure connection.
Bolt-On Master Ground Lug
The importance of a solid ground connection is paramount in any 12 V installation. Our Master Ground Lug accepts multiple ground wires (with a power ring on each), and bolts securely to the vehicle’s sheet metal, creating a large and secure electrical contact for reduced resistance and optimal performance.
Stainless-steel lug with plated brass contact puck. Aggressive star washers provide maximum “bite” on the sheet metal for a secure connection.
USB-C and USB-A Charging Jack for Panel-Mounting
This panel-mount jack facilitates the creation of a permanent high-power, 5V / 2.1A output charging point for both USB-C and USB-A digital devices. For visual confirmation, a built-in blue LED illuminates whenever power is active. An appropriate USB cable (not included) is required to connect to your device.
This product is designed to be installed on any flat surface up to 1.25-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
2-Way Fused Power Distribution Block
Designed to split a large wire down to two smaller wires where fusing of the small wires is needed. The input of this block accepts wire from 1/0 to 4 AWG, while the two fused outputs each accept wire from 4 AWG to 8 AWG. OmniSert receptacles capture various size wires without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and cover provide insulation and protection.
Requires two MAXI Fuses, appropriately rated for the equipment being connected. These are sold separately. Fuses can be pulled and inserted without removing the cover.
Ultra-Compact Universal Battery Connector, Positive or Negative
The tiny size of the XD-BTS battery connector makes it easy for tight-space installations, and ideal for smaller systems that require a single main power wire for the audio system. OmniSert technology ensures secure, high-integrity wire contact in the captured-wire connector for any wire from 10 AWG – 4 AWG. An additional side-mounted power ring provision allows you to connect factory harnesses or an additional power wire, if needed.
The included adaptor collar allows it to be used for negative or positive battery post connections, where the secure clamping design ensures a tight fit to the battery post. Adaptors are sold separately for side-post batteries. Red and black caps are provided so that you can easily mark your battery connection as positive or negative.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate cover provides insulation and protection.
+1 (345) 945-3950
LITHE - 01553 Lithe Audio 3" Spot Ceiling Speaker (SINGLE) 
LITHE - 01271 Shielded Cable To Jack To Jack 10M 
LITHE - 01580 Lithe Audio 5M Speaker Cable 18GA 
