No products in the cart.
JL Audio – SBX-T-TACDCG3/10TW3 Stealthbox Enclosed Subwoofer for 2016-2023 Toyota Tacoma Double Cab
$999.99
Stealthbox for 2016-2023 Toyota Tacoma Double Cab
Toyota’s Tacoma Double Cab features a highly optimized interior cabin with almost zero wasted space. This makes adding a serious subwoofer a major challenge, but not one that our design team could not overcome.
Benefiting from the small box prowess and shallow mounting depth of our innovative, TW3 thin-line driver, we engineered a subwoofer solution that fits snugly behind the rear seat. Featuring a rugged, custom-molded, sealed enclosure design, this Stealthbox model houses a 10-inch TW3 subwoofer. The results are stunning: real, deep sub-bass and totally undisturbed interior comfort and utility.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure; 400-watt power handling; wired for 2-ohm mono. Installs in storage pocket behind the passenger side rear seat. Black steel mesh woofer grille is included. Requires relocation of factory amplifier and removal of factory “subwoofer,“ if so equipped. For models equipped with a factory subwoofer, you must purchase a plain (without subwoofer) passenger side rear cargo trim panel from Toyota parts.
Stealthbox for 2016-2023 Toyota Tacoma Double Cab
Toyota’s Tacoma Double Cab features a highly optimized interior cabin with almost zero wasted space. This makes adding a serious subwoofer a major challenge, but not one that our design team could not overcome.
Benefiting from the small box prowess and shallow mounting depth of our innovative, TW3 thin-line driver, we engineered a subwoofer solution that fits snugly behind the rear seat. Featuring a rugged, custom-molded, sealed enclosure design, this Stealthbox model houses a 10-inch TW3 subwoofer. The results are stunning: real, deep sub-bass and totally undisturbed interior comfort and utility.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure; 400-watt power handling; wired for 2-ohm mono. Installs in storage pocket behind the passenger side rear seat. Black steel mesh woofer grille is included. Requires relocation of factory amplifier and removal of factory “subwoofer,“ if so equipped. For models equipped with a factory subwoofer, you must purchase a plain (without subwoofer) passenger side rear cargo trim panel from Toyota parts.
Brand
JL Audio
Related Products
Related products
- Car Subwoofers & enclosures
JL Audio – 10TW3-D8 10-inch Subwoofer Driver, Dual 8 ohm
TW3 10-inch Subwoofer (400 W, dual 8 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3?s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logoSKU: JL AUDIO - 10TW3-D8 - Car Subwoofers & enclosures
JL Audio – 13TW5V2-4 13.5-inch Subwoofer Driver, 4 ohm
TW5v2 13.5-inch Subwoofer (600 W, 4 ohm)
We couldn’t leave the ultimate thin woofer alone… we had to make it even better.
Our patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a concentric tube structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.
To unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.
In keeping with its ?tight-spaces? mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.
The 13TW5v2 is best used with amplifier power in the 250W – 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure.
Never has such high-quality sub-bass been possible in the most challenging installation applications.
SKU: JL AUDIO - 13TW5V2-4 - Car Subwoofers & enclosures
JL Audio – 10W7AE-3 10-inch Subwoofer Driver, 3 ohm
10th Anniversary Edition – W7 10-inch Subwoofer (750 W, 3 ohm)
If you are seeking reference-grade sub-bass from a 10-inch driver, your search ends here. Total Car Audio in the UK called it like this when they reviewed the 10W7: “This gives an all round performance of such high quality on every level, that bettering it will be very hard to achieve.” Not only does the 10W7 deliver amazing excursion capability for its size, but it also maintains complete composure under power and is able to track complex bass material with uncanny accuracy and power.
The 10W7AE is best used with amplifier power in the 300W – 750W range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure.
W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7’s, but they are distinguished by the following cosmetic differences:
– Satin-Black Powdercoated Baskets
– Bright Anodized Surround Clamp Ring
– Anniversary Edition Cone Badge
– Anniversary Edition Terminal LabelSKU: JL AUDIO - 10W7AE-3 - Car Subwoofers & enclosures
JL Audio – 12W7AE-3 12-inch Subwoofer Driver, 3 ohm
10th Anniversary Edition – W7 12-inch Subwoofer (1000 W, 3 ohm)
The 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called “addictive,” “seductive” and “the new subwoofer reference”, by some of the world’s toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality.
This potent driver is best used with amplifier power in the 400W – 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7’s, but they are distinguished by the following cosmetic differences:
– Satin-Black Powdercoated Baskets
– Bright Anodized Surround Clamp Ring
– Anniversary Edition Cone Badge
– Anniversary Edition Terminal LabelSKU: JL AUDIO - 12W7AE-3
