No products in the cart.
JL Audio – SBA-J-JLU-UAR 2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
$249.99
2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versions
2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versions
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – VXi-BTC JLid Bluetooth Communicator for VXi Amplifiers
JLid Bluetooth Communicator for VXi Amplifiers
The VXi-BTC is a wireless communication accessory designed to add handheld control functionality to VXi amplifiers. Equipped with Bluetooth LE (Low Energy), the VXi-BTC permits wireless (up to 33 ft/10 m away) configuration of VXi amplifiers using your compatible mobile device running TüN mobile applications.
Note: The VXi-BTC provides a control interface only and does not support audio streaming.
Mobile TüN software:
TüN Mobile – For iPad and Android tablets. Enjoy the full-featured TüN software experience on your tablet, with the freedom of a wireless connection. (TüN Mobile is available on the App Store and on Google Play.)
What is Included:
- (1) VXi-BTC Bluetooth Communicator
- (1) CAT5e Network Cable (6.5 ft./2 m)
- (1) Mounting Clip
- (2) Mounting Screws
SKU: JL Audio - VXi-BTC - Car and Marine Accessories
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
SKU: JL Audio - MVi-HUB - Car and Marine Accessories
JL Audio – HD_STACK_KIT Amplifier Stacking Hardware Kit, HD/MHD
Amplifier Stacking Hardware Kit for JL Audio HD and MHD Amplifiers
This hardware kit allows you to stack one HD or MHD amplifier onto another. By using multiple kits, it is possible to stack multiple HD and MHD amps. The kit includes four specifically engineered mating bolts, and four threaded, alloy stacking caps.
SKU: JL Audio - HD_STACK_KIT - Car and Marine Accessories
JL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
Car and Marine AccessoriesJL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
SKU: JL Audio - MMA-1-HTML
