No products in the cart.
JL Audio – SB-T-TUNDB3/10TW3/BK Stealthbox Enclosed Subwoofer for 2007-2021 Toyota Tundra Double Cab with Black or Red Rock interior
$1,699.99
Stealthbox for 2007-2021 Toyota Tundra Double Cab with Black or Red Rock interior
The full-size truck wars are in full-effect, and Toyota is not being left behind. This new Tundra offers amazing space for people and cargo, along with impressive interior quality and refinement.
One area in which this big truck needs some help is in the audio department, where a quality sub-bass solution is desperately needed. To this end, our Stealthbox team deployed a pair of our patented thin-line technology Subwoofers and wrapped them in an optimized sealed enclosure. This enclosure is designed to install underneath the rear bench seat, where it remains completely out of sight, but delivers a powerful low-frequency punch.
The Hard Data: Contains two 10TW3-D8 Subwoofers in a sealed enclosure. 800 watt power handling. Wired for 2 ohm mono. Installs under driver-side rear seat and requires no permanent modifications to the vehicle. Will not fit Tundra CrewMax.
Stealthbox for 2007-2021 Toyota Tundra Double Cab with Black or Red Rock interior
The full-size truck wars are in full-effect, and Toyota is not being left behind. This new Tundra offers amazing space for people and cargo, along with impressive interior quality and refinement.
One area in which this big truck needs some help is in the audio department, where a quality sub-bass solution is desperately needed. To this end, our Stealthbox team deployed a pair of our patented thin-line technology Subwoofers and wrapped them in an optimized sealed enclosure. This enclosure is designed to install underneath the rear bench seat, where it remains completely out of sight, but delivers a powerful low-frequency punch.
The Hard Data: Contains two 10TW3-D8 Subwoofers in a sealed enclosure. 800 watt power handling. Wired for 2 ohm mono. Installs under driver-side rear seat and requires no permanent modifications to the vehicle. Will not fit Tundra CrewMax.
Brand
JL Audio
Related Products
Related products
- Car Subwoofers & enclosures
JL Audio – 10W1V3-4 10-inch Subwoofer Driver, 4 ohm
W1v3 10-inch Subwoofer (300 W, 4 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-4 - Car Subwoofers & enclosures
JL Audio – 10TW1-4 10-inch Subwoofer Driver, 4 ohm
TW1 10-inch Subwoofer (300 W, 4 ohm)
Built on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
– Very shallow mounting depth (4.36 in / 111 mm)
– No pole vent: permits mounting close to rear wall of enclosure
– Extremely small sealed enclosure volume requirements
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Cast alloy frame with flat edges for tight driver grouping
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Steel mesh grille included with each driverSKU: JL AUDIO - 10TW1-4 - Car Subwoofers & enclosures
JL Audio – 12TW1-4 12-inch Subwoofer Driver, 4 ohm
TW1 12-inch Subwoofer (300 W, 4 ohm)
Built on JL Audio’s patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.65 cu.ft. / 18.4 liters). This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 12TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
– Very shallow mounting depth (4.62 in / 117 mm)
– No pole vent: permits mounting close to rear wall of enclosure
– Extremely small sealed enclosure volume requirements
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Cast alloy frame with flat edges for tight driver grouping
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Steel mesh grille included with each driverSKU: JL AUDIO - 12TW1-4 - Car Subwoofers & enclosures
JL Audio 12W6v3-D4 12-inch Subwoofer Driver, Dual 4 ohm
W6v3 12-inch Subwoofer (600 W, dual 4 ohm voice coils)
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 12W6v3 is best used with amplifier power in the 200W – 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure.
Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 ? voice coils permit deploying the W6v3 as a 2 ohm or 8 ohm driver.SKU: JL AUDIO - 12W6V3-D4
