No products in the cart.
JL Audio – SB-POL-SLINGSUBD/10W3v3-2 Stealthbox Enclosed Subwoofer for 2015-Up Polaris Slingshot, 2 Ω (Driver Side)
$1,099.99
Stealthbox for 2015-Up Polaris Slingshot, 2 Ω (Driver Side)
The Polaris Slingshot delivers serious thrills with its aggressive open-air design. To complete the experience, you need an audio system with real, high-performance sub-bass.
Purpose-built for Polaris Slingshot vehicles, these Stealthbox systems provide powerful amounts of deep bass, without interfering with seating space or comfort. With a rugged, weatherproof finish, each sealed enclosure houses a 10W3v3 subwoofer and solidly mounts into one rear storage compartment.
For system design flexibility, driver and passenger side Stealthbox systems are sold separately, available with 2 or 4 ohm drivers. Most people will be very pleased with a single Stealthbox, but feel free to install both for maximum sub-bass performance.
Best used in conjunction with our Stealthbox front speaker system designed for the Slingshot.
The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Installs in storage compartment behind the driver seat, replacing the factory compartment cover. Steel mesh grille is included. The factory compartment is blocked off and not usable after installation.
Stealthbox for 2015-Up Polaris Slingshot, 2 Ω (Driver Side)
The Polaris Slingshot delivers serious thrills with its aggressive open-air design. To complete the experience, you need an audio system with real, high-performance sub-bass.
Purpose-built for Polaris Slingshot vehicles, these Stealthbox systems provide powerful amounts of deep bass, without interfering with seating space or comfort. With a rugged, weatherproof finish, each sealed enclosure houses a 10W3v3 subwoofer and solidly mounts into one rear storage compartment.
For system design flexibility, driver and passenger side Stealthbox systems are sold separately, available with 2 or 4 ohm drivers. Most people will be very pleased with a single Stealthbox, but feel free to install both for maximum sub-bass performance.
Best used in conjunction with our Stealthbox front speaker system designed for the Slingshot.
The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Installs in storage compartment behind the driver seat, replacing the factory compartment cover. Steel mesh grille is included. The factory compartment is blocked off and not usable after installation.
Brand
JL Audio
Related Products
Related products
- Car Subwoofers & enclosures
JL Audio – 10W3v3-2 10-inch Subwoofer Driver, 2 ohm
W3v3 10-inch Subwoofer (500 W, 2 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-2 - Car Subwoofers & enclosures
JL Audio – 12TW3-D4 12-inch Subwoofer Driver, Dual 4 ohm
TW3 12-inch Subwoofer (400 W, dual 4 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3?s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logoSKU: JL AUDIO - 12TW3-D4 - Car Subwoofers & enclosures
JL Audio – 10TW3-D4 10-inch Subwoofer Driver, Dual 4 ohm
TW3 10-inch Subwoofer (400 W, dual 4 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented ?floating cone attach method? technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logo
– Precision-built in USA at JL Audio’s Miramar, Florida factory with global componentsSKU: JL AUDIO - 10TW3-D4 - Car Subwoofers & enclosures
JL Audio – 8W3V3-4 8-inch Subwoofer Driver, 4 ohm
If you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.
The 8W3v3-4 is best used with amplifier power in the 75W – 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure.
SKU: JL AUDIO - 8W3V3-4
