No products in the cart.
JL Audio – SB-J-WRUD/10TW1-4 Stealthbox Enclosed Subwoofer for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
$1,099.99
Stealthbox for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Whether your adventures are urban, suburban or on the roughest trails… these Stealthbox systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. Our patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. The rugged construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1-4 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 4 ohms (using two achieves a 2 ohm load in parallel). A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Stealthbox for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Whether your adventures are urban, suburban or on the roughest trails… these Stealthbox systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. Our patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. The rugged construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1-4 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 4 ohms (using two achieves a 2 ohm load in parallel). A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Car and Marine AccessoriesJL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Crimpable power rings are made of pure copper construction with marine-grade stannum-plating to resist corrosion. They include two red and two black insulator sleeves. Sold in packs of four.
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
SKU: JL Audio - XD-RT2-4PAK - Car and Marine Accessories
JL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
Car and Marine AccessoriesJL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
4-Ch. Load-Sensing Adaptor for use with FiX 82 or FiX 86 OEM Integration DSP
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX DSP, is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX is connected to more than four channels of audio from your OEM head unit or amplifier.
SKU: JL Audio - FiX-LSA-4 - Car and Marine Accessories
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
SKU: JL Audio - MVi-HUB - Car and Marine Accessories
JL Audio – SBA-J-JLU-UAR 2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
Car and Marine AccessoriesJL Audio – SBA-J-JLU-UAR 2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versionsSKU: JL Audio - SBA-J-JLU-UAR
