JL Audio – SB-J-WRUD/10TW1-4 Stealthbox Enclosed Subwoofer for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
$1,099.99
Stealthbox for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Whether your adventures are urban, suburban or on the roughest trails… these Stealthbox systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. Our patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. The rugged construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1-4 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 4 ohms (using two achieves a 2 ohm load in parallel). A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Stealthbox for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Whether your adventures are urban, suburban or on the roughest trails… these Stealthbox systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. Our patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. The rugged construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1-4 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 4 ohms (using two achieves a 2 ohm load in parallel). A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Related Products
Related products
- Car and Marine Accessories
JL Audio – XD-MFBW-MAXI Water-Resistant Master MAXI Fuse Block
0 out of 5(0)Water-Resistant Master MAXI Fuse Block for 8 AWG – 4 AWG Wire (100A Maximum)
Our ultra-compact Maxi Master Fuse Block is easy to install and allows you to accurately fuse your amplifier with a reliable, genuine MAXI fuse. OmniSert captured-wire receptacles accept various size wires from 8 AWG to 4 AWG, without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and hinged cover provide insulation and protection.
Requires one MAXI Fuse, appropriately rated for the equipment being connected. These are sold separately. Fuse can be pulled and inserted without removing the cover.
SKU: JL Audio - XD-MFBW-MAXI - Car and Marine Accessories
JL Audio – XD-USB-A/B-18 Heavy-Duty USB 2.0 Cable with one USB Type A and one USB Type B connector – 18 ft. (5.5 m)
- Audio Controller and Receiver, Car and Marine Accessories
JL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
Audio Controller and Receiver, Car and Marine AccessoriesJL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
0 out of 5(0)Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system.
Equipped with BLUETOOTH wireless technology and the Qualcomm aptX HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS).
Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
SKU: JL Audio - MBT-RXv2 - Car and Marine Accessories
JL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
Car and Marine AccessoriesJL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
0 out of 5(0)Full-function, NMEA 2000 network wired remote controller with full color LCD display
The MMR-40 is a NMEA 2000 Network Controller engineered to add full-function, auxiliary control to MediaMaster source units.
Outfitted with a NMEA 2000 Micro-C connector, the MMR-40 connects to a host MediaMaster source unit in two ways:
- Direct interface with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included)
- Direct connection of one MMR-40 with one host MediaMaster source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000 network
Once connected, the MMR-40 automatically recognizes the host MediaMaster source unit and will then mirror all host source unit controls and screen info onto the MMR-40’s full-color, 2.8-inch LCD display, resulting in a complete MediaMaster user experience.
The MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments.
The MMR-40 includes the following features:
- NMEA 2000 Certified (LEN 4)
- Easy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls
- Independent day/night display themes and lighting controls
- IP66 rated for real marine duty
- Protective Sun Cover included
Note: The MMR-40 is not a stand-alone receiver and does not function without a connected MediaMaster source unit. All remote control functionality of the MMR-40 is solely derived from the host source unit. Functionality of the MMR-40 requires connection to a NMEA 2000 network or use of MMC-PN2K powered network cables (sold separately).
SKU: JL Audio - MMR-40