JL Audio – SB-CAN-G2MVX3D/10TW3 Stealthbox Enclosed Subwoofer for 2019-Up Can-Am Maverick X3 2-Seat (Driver Side)
$1,299.99
Stealthbox for 2019-Up Can-Am Maverick X3 2-Seat (Driver Side)
Can-Am’s maximum-performance Maverick X3 is built to deliver thrilling outdoor adventures on virtually all off-road terrains. If great audio is to be part of your journey, the X3 definitely needs a high-output, high fidelity subwoofer.
Purpose-built for the 2-seat Can-Am Maverick X3, these Stealthbox systems mount completely out-of-sight beneath each seat, generating loads of deep, gut-shaking bass. Sold individually for the driver and passenger sides, each sealed enclosure features a rugged, weatherproof finish and houses a 10-inch, TW3 thin-line Subwoofer. All mounting hardware is included for a secure, great sounding installation.
The Hard Data: Contains one 10TW3-D4 in an up-firing, sealed enclosure. 400 watt power handling. Wired for 2 ohms mono. Choose from models that install beneath driver’s seat or passenger seat (or get both for maximum performance). A steel mesh woofer grille is included with each Stealthbox. Will only fit 2019-Up Maverick X3 models!
Stealthbox for 2019-Up Can-Am Maverick X3 2-Seat (Driver Side)
Can-Am’s maximum-performance Maverick X3 is built to deliver thrilling outdoor adventures on virtually all off-road terrains. If great audio is to be part of your journey, the X3 definitely needs a high-output, high fidelity subwoofer.
Purpose-built for the 2-seat Can-Am Maverick X3, these Stealthbox systems mount completely out-of-sight beneath each seat, generating loads of deep, gut-shaking bass. Sold individually for the driver and passenger sides, each sealed enclosure features a rugged, weatherproof finish and houses a 10-inch, TW3 thin-line Subwoofer. All mounting hardware is included for a secure, great sounding installation.
The Hard Data: Contains one 10TW3-D4 in an up-firing, sealed enclosure. 400 watt power handling. Wired for 2 ohms mono. Choose from models that install beneath driver’s seat or passenger seat (or get both for maximum performance). A steel mesh woofer grille is included with each Stealthbox. Will only fit 2019-Up Maverick X3 models!
Related Products
Related products
-
Car Subwoofers & enclosures
JL Audio – 12W0V3-4 12-inch Subwoofer Driver, 4 ohm
0 out of 5(0)W0v3 12-inch Subwoofer (300 W, 4 ohm)
The 12W0v3 is a rugged performer with excellent efficiency, excursion capability and linearity. Its overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our Elevated Frame Cooling design for enhanced power handling and reliability.
The 12W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
SKU: JL AUDIO - 12W0V3-4 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-2 10-inch Subwoofer Driver, 2 ohm
0 out of 5(0)W1v3 10-inch Subwoofer (300 W, 2 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-2 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-2 -
Car Subwoofers & enclosures
JL Audio – 13TW5V2-4 13.5-inch Subwoofer Driver, 4 ohm
0 out of 5(0)TW5v2 13.5-inch Subwoofer (600 W, 4 ohm)
We couldn’t leave the ultimate thin woofer alone… we had to make it even better.
Our patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a concentric tube structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.
To unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.
In keeping with its ?tight-spaces? mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.
The 13TW5v2 is best used with amplifier power in the 250W – 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure.
Never has such high-quality sub-bass been possible in the most challenging installation applications.
SKU: JL AUDIO - 13TW5V2-4 -
Car Subwoofers & enclosures
JL Audio – 12W3V3-4 12-inch Subwoofer Driver, 4 ohm
0 out of 5(0)This powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.
The 12W3v3-4 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 1.125 cu. ft. (31.8 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
SKU: JL AUDIO - 12W3V3-4






