No products in the cart.
JL Audio – SA-TPOD-100-BK 1-inch (25 mm) Tweeter Pods for C7-100ct, C6-100ct or C3-100ct, Pair
$179.99
1-inch (25 mm) Tweeter Pods for C7-100ct, C6-100ct or C3-100ct, Pair – Black Anodized
Adding component tweeters to your audio system is an easy way to elevate the soundstage and improve its overall performance. Designed to house a set of C3, C6 or C7 tweeters (not included), these pods are machined from a single piece of billet aluminum and hard coated with a black anodized finish, so they’re solid, tough and corrosion resistant.
Each pod requires just a single hole (7/16 in / 11 mm) for installation and includes hardware for easy mounting on almost any flat surface up to 0.63 inches (16 mm) thick. Once mounted, each pod can be rotated to optimize the sound dispersion even further before locking its final position.
1-inch (25 mm) Tweeter Pods for C7-100ct, C6-100ct or C3-100ct, Pair – Black Anodized
Adding component tweeters to your audio system is an easy way to elevate the soundstage and improve its overall performance. Designed to house a set of C3, C6 or C7 tweeters (not included), these pods are machined from a single piece of billet aluminum and hard coated with a black anodized finish, so they’re solid, tough and corrosion resistant.
Each pod requires just a single hole (7/16 in / 11 mm) for installation and includes hardware for easy mounting on almost any flat surface up to 0.63 inches (16 mm) thick. Once mounted, each pod can be rotated to optimize the sound dispersion even further before locking its final position.
Brand
JL Audio
Related Products
Related products
- Car Speakers
JL Audio C3-570 Evolution C3 Series 5 inch x 7 inch convertible component speaker system
Car SpeakersJL Audio C3-570 Evolution C3 Series 5 inch x 7 inch convertible component speaker system
2-Way Convertible Component / Coaxial System: 5 x 7 / 6 x 8-inch (125 x 180 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems… guaranteed. So, don’t make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker… these ovals are as impressive as our round format systems.
The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are not available for this product.
Sonic character: Clean and Powerful
Sold as a pair.
SKU: JL Audio-C3-570 - Car Speakers, Car Subwoofers & enclosures
JL Audio C6-650cw C6 6.5 inch component woofer (Single)
6.5 inch (165 mm) Component Woofer (with Grille)
Born from shared technologies used in our flagship C7 speakers, the C6-650cw component woofer benefits from vast woofer design experience and advanced modeling systems of JL Audio.
Ideal for active systems, the C6-650cw component woofer features a proprietary cast alloy frame outfitted with our Elevated Frame Cooling™ technology and a DMA-optimized motor system to generate outstanding midbass impact with ultralow distortion.
Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor, such as the JL Audio TwK DSP, or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.
C6-650cw Component Woofer Features:
• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response
• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
• Cast alloy frame with our Elevated Frame Cooling feature
• Includes fine mesh grilleDesign Bandwidth:
With 48 dB/octave filters: 55 Hz-6 kHz
With 24 dB/octave filters: 65 Hz-6 kHz
With 12 dB/octave filters: 80 Hz-6 kHzComponent woofers are sold individually and include a plastic grille tray, one fine steel mesh grille and one electroformed JL Audio badge logo.
SKU: JL Audio-C6-650cw - Car Speakers
JL Audio C6-650 C6 6.5 inch component speaker system
Two-way Component System: 6.5″ (165 mm) Woofer, 1″ (25 mm) Silk Dome Tweeter
Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability.
Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5 inch (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultra-low distortion.
The 1″ (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective, polycarbonate cover. Each C6 passive crossover also includes an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure.
C6 Woofer Features:
• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response
• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
• Cast alloy frame with our Elevated Frame Cooling feature
• Includes fine mesh grillesC6 Tweeter Features:
• Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
• Neodymium motor delivers high magnetic flux from a compact motor design
• Ferrofluid cooling and damping improves reliability and response smoothness
• Includes surface- and flush-mount fixturesWoofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo.
Speakers are sold as a pair.
SKU: JL Audio-C6-650 - Car Speakers
Pioneer – TS-A1677S A-Series 6.5″ 3-Way Coaxial 320 Watts Peak Power Car Audio Speakers
Upgrade to High Performance
The main highlight of the new A-Series speakers ? improved sound and enhanced dynamic range. These redesigned speakers sport new tweeters, light-but-rigid Carbon and Mica reinforced IMPP speaker cones larger in size compared to its predecessors, and a flexible moving spider with a wider controlled excursion. All this translates into a powerful audio experience with extended high frequencies, deeper bass, and low distortion that easily outperforms factory-fitted offerings and the competition.Open and Smooth Concept
The Open & Smooth sound concept of our industry-leading speakers delivers both sonic excellence and performance. The open-staging and smooth transition of driver response makes for an immersive experience that is truly the ultimate in-car soundSKU: PIONEER - TS-A1677S
