JL Audio PES110-TW1-4 StowAway sealed downward-firing enclosure with one 10TW1-4 4-ohm shallow-mount subwoofer
$799.99
Enclosed Subwoofer System with Single 10TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
- Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
- Recommended amplifier power: 75–300 watts
- Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
| Height (H) | 7.0 in / 178 mm |
| Width (W) | 18.0 in / 457 mm |
| Depth (D) | 12.5 in / 318 mm |
| Mounting Location Depth (A) | 10.66 in / 271 mm |
| Mounting Location Width (B) | 16.16 in / 410 mm |
Enclosed Subwoofer System with Single 10TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
- Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
- Recommended amplifier power: 75–300 watts
- Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
| Height (H) | 7.0 in / 178 mm |
| Width (W) | 18.0 in / 457 mm |
| Depth (D) | 12.5 in / 318 mm |
| Mounting Location Depth (A) | 10.66 in / 271 mm |
| Mounting Location Width (B) | 16.16 in / 410 mm |
Brand
JL Audio
Related Products
Related products
-
Car Subwoofers & enclosures
JL Audio – 13W7AE-D1.5 13.5-inch (345 mm) Subwoofer Driver, Dual 1.5 ohm
10th Anniversary Edition – W7 13.5-inch Subwoofer (1500 W, Dual 1.5 ohm voice coils)
Words like “extreme,” “reference” and “ultimate” get thrown around quite a bit in the Subwoofer world, but rare is the product that can honestly lay claim to them. The 13W7AE does.
Taking the W7 design formula to its highest level, the 13W7AE offers a staggering linear excursion envelope that exceeds 1.25 inches (32 mm) one-way, along with a suspension capable of over 4-inches of peak-to-peak excursion. Combine that with a piston diameter that is 28% larger than the 12W7AE’s, and you have a serious high-performance driver for the most demanding applications. With a 13W7AE, limits simply vanish and amazing sub-bass happens… on all fronts, at any level.
Our most potent Subwoofer is best used with amplifier power in the 500W – 1500W range and is optimized to operate in a 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.375 cu. ft. (67.3 l) ported enclosure.
W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7’s, but they are distinguished by the following cosmetic differences:
– Satin-Black Powdercoated Baskets
– Bright Anodized Surround Clamp Ring
– Anniversary Edition Cone Badge
– Anniversary Edition Terminal LabelSKU: JL Audio - 13W7AE-D1.5 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-4 10-inch Subwoofer Driver, 4 ohm
W1v3 10-inch Subwoofer (300 W, 4 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-4 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-2 10-inch Subwoofer Driver, 2 ohm
W1v3 10-inch Subwoofer (300 W, 2 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-2 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-2 -
Car Subwoofers & enclosures
JL Audio – 8W3V3-4 8-inch Subwoofer Driver, 4 ohm
If you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.
The 8W3v3-4 is best used with amplifier power in the 75W – 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure.
SKU: JL AUDIO - 8W3V3-4
