No products in the cart.
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
$499.99
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Car and Marine AccessoriesJL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Crimpable power rings are made of pure copper construction with marine-grade stannum-plating to resist corrosion. They include two red and two black insulator sleeves. Sold in packs of four.
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
SKU: JL Audio - XD-RT2-4PAK - Car and Marine Accessories
JL Audio – MAX-KIT Professional-grade, Dual FFT measurement System With Five Microphones
Car and Marine AccessoriesJL Audio – MAX-KIT Professional-grade, Dual FFT measurement System With Five Microphones
MAX Audio Measurement System
MAX is a professional-grade, dual FFT measurement system with five microphones. It is ideal for general audio system measurements, system tuning with DSP, troubleshooting and testing equipment, and solving OEM integration challenges. MAX has many applications in home audio, car audio, marine audio and professional audio.
With full integration of VXi and MVi DSP controls, MAX simplifies your measurement setup, allowing you to perform measurements and DSP adjustments with one computer and one software application: TüN 4.0, which offers micro-automations that speed up equalization and channel delay setting.
What can you do with MAX?
- Test, troubleshoot and analyze any audio system with full detail on the three dimensions of audio: level, frequency and time… all in real time!
- Streamline the tuning of car audio DSP products in real-world shop environments. Simply connect the hardware, place the microphone array, launch TüN software and go!
- Quickly test room modes for home audio and home theater subwoofer placements, and accurately adjust crossover and phase controls for a seamless transition to the subwoofer.
- Evaluate individual or multiple audio zones in a marine installation for frequency response and level.
- Get the best measurements possible with 5-microphone averaging! MAX™ multiplexes up to five included microphones to conduct single FFT measurements of level and frequency response (RTA and spectrograph).
- Conduct Dual FFT measurements of up to five simultaneous transfer functions with precise displays of magnitude (frequency response), phase, impulse response (delay) and coherence (noise immunity).
- Each transfer function captures all the audio data for real-time or comparative analysis.
- Built-in Test Signal Generator (pink and white noise, sine waves, square waves, etc.), plus WAV file playback capability.
Powerful Automations with VXi and MVi amplifiers:
- Automatic True Delay feature sets VXi/MVi channel delays in a flash, far more accurately than any other method.
- Autoset EQ feature sets the VXi/MVi parametric EQ’s to your selected target, in seconds. You can also overlay VXi/MVi equalizer controls over the frequency response display to perform precise, manual EQ adjustments with real time visual feedback.
MAX is Incredibly Flexible and Accurate!
- MAX measurement accuracy is on par with professional test equipment that sells for tens of thousands of dollars.
- Wide Range of Inputs (up to five microphones, high-level analog signals up to 80V, low-level analog signals up to 7V, optical digital S/PDIF signals)
- Multiple Signal Outputs (built-in DAC feeding analog line level outputs and headphone outputs, plus optical digital output)
- A built-in USB Hub simplifies connection to computer and DSP amplifiers, or other USB devices (not intended for charging devices).
What is in the Kit?
- The MAX-KIT includes the MAX hardware interface, five measurement microphones, a multi-mic fixture, mounting accessories, cables and power supplies, all packed in a locking, waterproof hard case.
- An optional, specialized probe kit for speaker impedance and high-voltage electrical measurements is available separately: “MAX-PROBE KIT” (90922)
What else will you need:
- A PC (Windows 10), or Mac (OS 11 Big Sur or newer)
- Our free TüN 4 software, available below
- A mic stand or tripod to support the multi-mic holder.
SKU: JL Audio - MAX-KIT - Audio Controller and Receiver, Car and Marine Accessories
JL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
Audio Controller and Receiver, Car and Marine AccessoriesJL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system.
Equipped with BLUETOOTH wireless technology and the Qualcomm aptX HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS).
Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
SKU: JL Audio - MBT-RXv2 - Car and Marine Accessories
JL Audio – SBA-J-JK-FHB 2007-2018 Jeep Wrangler (JK) Fuse Holder Bracket
2007-2018 Jeep Wrangler (JK) Fuse Holder Bracket
The SBA-J-JK-FHB Fuse Holder Bracket easily and securely mounts up to two JL Audio XB-MFBU-ANL Master Fuse Blocks (sold separately). Attaches to the firewall of your 2-door or 4-door Wrangler using factory hardware (no drilling required). Powder-coated steel, engineered and built in USA.
SKU: JL Audio - SBA-J-JK-FHB
