No products in the cart.
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
$499.99
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – XB-BTU Universal Battery Connector, Positive or Negative
High-Capacity Universal Battery Connector, Positive or Negative
The XB-BTU Battery Connector is ideal for larger systems that require multiple power wire connections at the battery. It is capable of receiving 1/0 AWG, 2 AWG, 4 AWG or 8 AWG wire in each of its three captured-wire connection points (in any combination). OmniSert technology ensures secure, high-integrity wire contact. Multiple bushings are included to dress the wire exits, depending on the size wire used.
The included adaptor collar allows it to be used for negative or positive battery post connections, where the secure clamping design ensures a tight fit to the battery post. Adaptors are sold separately for side-post batteries.
We also include a “factory harness adaptor”, which can be installed in one of the three wire connections to accept power rings and most factory harness battery terminations.
360 forged and machined brass construction with a high-temperature polycarbonate base and cover.
SKU: JL Audio - XB-BTU - Car and Marine Accessories
JL Audio – VXi-BTC JLid Bluetooth Communicator for VXi Amplifiers
JLid Bluetooth Communicator for VXi Amplifiers
The VXi-BTC is a wireless communication accessory designed to add handheld control functionality to VXi amplifiers. Equipped with Bluetooth LE (Low Energy), the VXi-BTC permits wireless (up to 33 ft/10 m away) configuration of VXi amplifiers using your compatible mobile device running TüN mobile applications.
Note: The VXi-BTC provides a control interface only and does not support audio streaming.
Mobile TüN software:
TüN Mobile – For iPad and Android tablets. Enjoy the full-featured TüN software experience on your tablet, with the freedom of a wireless connection. (TüN Mobile is available on the App Store and on Google Play.)
What is Included:
- (1) VXi-BTC Bluetooth Communicator
- (1) CAT5e Network Cable (6.5 ft./2 m)
- (1) Mounting Clip
- (2) Mounting Screws
SKU: JL Audio - VXi-BTC - Car and Marine Accessories
JL Audio – SBA-J-JL-FHB 2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
Car and Marine AccessoriesJL Audio – SBA-J-JL-FHB 2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
The SBA-J-JL-FHB Fuse Holder Bracket is designed to securely mount up to two JL Audio XB-MFBU-ANL Master ANL Fuse Blocks (sold separately). Engineered and Built in USA, the SBA-J-JL-FHB Fuse Holder Bracket requires no drilled holes and installs using factory hardware.
The Hard Data: Attaches to the vehicle’s firewall using factory hardware. Fits 2-Door or 4-Door models. Will not fit Rubicon 392 or models equipped with the EcoDiesel engine.
Will not fit any 2018 “JK” Jeep models.
SKU: JL Audio - SBA-J-JL-FHB - Car and Marine Accessories
JL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
Car and Marine AccessoriesJL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA.
Will not fit 2-Door models.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versionsSKU: JL Audio - SBA-J-JKU-UAR
