JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
$129.99
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
Brand
JL Audio
Related Products
Related products
-
Car and Marine Accessories
JL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
Car and Marine AccessoriesJL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
4-Ch. Load-Sensing Adaptor for use with FiX 82 or FiX 86 OEM Integration DSP
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX DSP, is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX is connected to more than four channels of audio from your OEM head unit or amplifier.
SKU: JL Audio - FiX-LSA-4 -
Car and Marine Accessories
JL Audio – XD-MFBW-MAXI Water-Resistant Master MAXI Fuse Block
Water-Resistant Master MAXI Fuse Block for 8 AWG – 4 AWG Wire (100A Maximum)
Our ultra-compact Maxi Master Fuse Block is easy to install and allows you to accurately fuse your amplifier with a reliable, genuine MAXI fuse. OmniSert captured-wire receptacles accept various size wires from 8 AWG to 4 AWG, without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and hinged cover provide insulation and protection.
Requires one MAXI Fuse, appropriately rated for the equipment being connected. These are sold separately. Fuse can be pulled and inserted without removing the cover.
SKU: JL Audio - XD-MFBW-MAXI -
Car and Marine Accessories
JL Audio – SB-J-WRUD/10TW1-4 Stealthbox Enclosed Subwoofer for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Car and Marine AccessoriesJL Audio – SB-J-WRUD/10TW1-4 Stealthbox Enclosed Subwoofer for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Stealthbox for 2007-2017 Jeep Wrangler Unlimited (Driver Side – 4 Ω)
Whether your adventures are urban, suburban or on the roughest trails… these Stealthbox systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. Our patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. The rugged construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1-4 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 4 ohms (using two achieves a 2 ohm load in parallel). A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
SKU: JL Audio - SB-J-WRUD/10TW1-4 -
Car and Marine Accessories
JL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
Car and Marine AccessoriesJL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA.
Will not fit 2-Door models.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versionsSKU: JL Audio - SBA-J-JKU-UAR
