No products in the cart.
JL Audio – MMR-25W Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
$99.99
Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
Outfitted with ultra-efficient, Bluetooth Low Energy technology, the MMR-25W controller delivers convenient handheld command of your MediaMaster source unit (MM105 or MM105-HR), from up to 35 feet (11 m) away.
Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones. Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle’s simplistic design permits installation on any flat surface. A replaceable 3V (CR2032) battery is also included. Up to eight remotes* can be directly paired to a single source unit (additional remotes sold separately).
* Includes total capacity of ALL paired Bluetooth devices (remote controllers, app controllers, streaming sources, etc.).
MediaMaster MMR-25W remote control functions (source dependent) include:
- Power On/Off
- Source Selection
- Audio Zone Selection/Lock
- Volume Up/Down
- Track Up/Down
- Track Fast-Forward/Fast-Rewind
- Favorite Up/Down
- Tuner Seek Up/Down
- Play/Pause
- Mute/Unmute
Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
Outfitted with ultra-efficient, Bluetooth Low Energy technology, the MMR-25W controller delivers convenient handheld command of your MediaMaster source unit (MM105 or MM105-HR), from up to 35 feet (11 m) away.
Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones. Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle’s simplistic design permits installation on any flat surface. A replaceable 3V (CR2032) battery is also included. Up to eight remotes* can be directly paired to a single source unit (additional remotes sold separately).
* Includes total capacity of ALL paired Bluetooth devices (remote controllers, app controllers, streaming sources, etc.).
MediaMaster MMR-25W remote control functions (source dependent) include:
- Power On/Off
- Source Selection
- Audio Zone Selection/Lock
- Volume Up/Down
- Track Up/Down
- Track Fast-Forward/Fast-Rewind
- Favorite Up/Down
- Tuner Seek Up/Down
- Play/Pause
- Mute/Unmute
Brand
JL Audio
Related Products
Related products
- Remote Level Control
JL Audio – HD-RLC Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All modelsWhen the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
SKU: JL Audio - HD-RLC - Remote Level Control
JL Audio – RBC-1 Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:
PowerWedge+: All Models
MicroSub+: All ModelsWhen the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
SKU: JL Audio - RBC-1 - Remote Level Control
JL Audio – M-RBC-1 Water-Resistant Remote Bass Control
Water-Resistant Remote Level Control for MX Monoblock Amplifiers or any JL Audio Monoblock with a “Remote Bass Control” port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
MX-Series: MX300/1 (in Low Pass Mode)
MX-Series: MX500/1 (in Low Pass Mode)
MX-Series: MX600/3 (Subwoofer Channel)
HX-Series (discontinued): HX300/1 (in Low Pass Mode)
MHX-Series (discontinued): MHX300/1 (in Low Pass Mode)The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D ( also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the M-RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.
SKU: JL Audio - M-RBC-1 - Remote Level Control
JL Audio – MLC-RW Marine Lighting Controller
Marine Lighting Controller
The MLC-RW is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the MLC-RW produces up to 30 amps (400 watts) of continuous output to power modern, multi-LED networks.
All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in WiFi connection.
Note: Wireless functionality requires your compatible iOS or Android device and the LiteWave ITI app. The MLC-RW also includes a suite of onboard safety features, including automatic over-current and short-circuit protection, as well as voltage and temperature monitoring.
SKU: JL Audio - MLC-RW
