JL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
$169.99
Round, wired, non-display remote controller for use with MediaMaster
The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster source units.
Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster source unit.
A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.
MediaMaster remote control capabilities include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Radio)
- Play/Pause (USB & BT)
- Mute/Unmute (Radio & Aux)
The MMR-20-BE is compatible with these MediaMaster source units:
- MM105
- MM100s-BE
- MM100s
- MM50
Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.
Round, wired, non-display remote controller for use with MediaMaster
The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster source units.
Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster source unit.
A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.
MediaMaster remote control capabilities include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Radio)
- Play/Pause (USB & BT)
- Mute/Unmute (Radio & Aux)
The MMR-20-BE is compatible with these MediaMaster source units:
- MM105
- MM100s-BE
- MM100s
- MM50
Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.
Brand
JL Audio
Related Products
Related products
-
Remote Level Control
JL Audio – CL-RLC Remote Level Control / Line Driver
Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs
The Possibilities are Endless…
The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
SKU: JL Audio - CL-RLC -
Remote Level Control
JL Audio – DRC-100 Digital Remote Control for JLid compatible products
Digital Remote Control for JLid compatible products
The DRC-100 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Rotary knob with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-100 controller will be determined by the device it is connected to.
The DRC-100 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
VXi-Series Amplifiers: All modelsSKU: JL Audio - DRC-100 -
Remote Level Control
JL Audio – RBC-1 Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:
PowerWedge+: All Models
MicroSub+: All ModelsWhen the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
SKU: JL Audio - RBC-1 -
Remote Level Control
JL Audio – DRC-205 Digital Remote Control for JLid compatible products
Digital Remote Control for JLid compatible products
The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Dual-concentric rotary controls with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to.
The DRC-205 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
TwK System Tuning DSP: All models
VXi-Series Amplifiers: All modelsSKU: JL Audio - DRC-205
