No products in the cart.
JL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
$499.99
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Car and Marine AccessoriesJL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
Crimpable power rings are made of pure copper construction with marine-grade stannum-plating to resist corrosion. They include two red and two black insulator sleeves. Sold in packs of four.
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
SKU: JL Audio - XD-RT2-4PAK - Car and Marine Accessories
JL Audio – XD-MFBW-MAXI Water-Resistant Master MAXI Fuse Block
Water-Resistant Master MAXI Fuse Block for 8 AWG – 4 AWG Wire (100A Maximum)
Our ultra-compact Maxi Master Fuse Block is easy to install and allows you to accurately fuse your amplifier with a reliable, genuine MAXI fuse. OmniSert captured-wire receptacles accept various size wires from 8 AWG to 4 AWG, without the need for adaptor sleeves.
Forged and machined brass construction with marine-grade stannum plating. A high-temperature polycarbonate base and hinged cover provide insulation and protection.
Requires one MAXI Fuse, appropriately rated for the equipment being connected. These are sold separately. Fuse can be pulled and inserted without removing the cover.
SKU: JL Audio - XD-MFBW-MAXI - Car and Marine Accessories
JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
SKU: JL Audio - MVi-DRCADAPT - Car and Marine Accessories
JL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
Car and Marine AccessoriesJL Audio – SBA-J-JKU-UAR 2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
2007-2017 Jeep Wrangler (JK) Unlimited Universal Amplifier Rack
The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA.
Will not fit 2-Door models.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versionsSKU: JL Audio - SBA-J-JKU-UAR
