No products in the cart.
JL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
$499.99
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
Car and Marine AccessoriesJL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
4-Ch. Load-Sensing Adaptor for use with FiX 82 or FiX 86 OEM Integration DSP
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX DSP, is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX is connected to more than four channels of audio from your OEM head unit or amplifier.
SKU: JL Audio - FiX-LSA-4 - Audio Controller and Receiver, Car and Marine Accessories
JL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
Audio Controller and Receiver, Car and Marine AccessoriesJL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system.
Equipped with BLUETOOTH wireless technology and the Qualcomm aptX HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS).
Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
SKU: JL Audio - MBT-RXv2 - Car and Marine Accessories
JL Audio – MMC-SXM/AUX Converts the SiriusXM Connector of MediaMaster Source Units into an additional Stereo AUX Input
Car and Marine AccessoriesJL Audio – MMC-SXM/AUX Converts the SiriusXM Connector of MediaMaster Source Units into an additional Stereo AUX Input
Converts the SiriusXM Connector of MediaMaster Source Units into an additional Stereo AUX Input
This adaptor cable converts the SiriusXM connector of compatible MediaMaster source units into a pair of analog auxiliary inputs (2V RMS input sensitivity).
Note: Functionality requires updated MediaMaster software. Not compatible with MM80-HR.
SKU: JL Audio - MMC-SXM/AUX - Car and Marine Accessories
JL Audio – SBA-J-JK-FHB 2007-2018 Jeep Wrangler (JK) Fuse Holder Bracket
2007-2018 Jeep Wrangler (JK) Fuse Holder Bracket
The SBA-J-JK-FHB Fuse Holder Bracket easily and securely mounts up to two JL Audio XB-MFBU-ANL Master Fuse Blocks (sold separately). Attaches to the firewall of your 2-door or 4-door Wrangler using factory hardware (no drilling required). Powder-coated steel, engineered and built in USA.
SKU: JL Audio - SBA-J-JK-FHB
