No products in the cart.
JL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
$499.99
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – VXi-HUB JLid Comm & Optical Audio Network Hub for VXi Amplifiers
Car and Marine AccessoriesJL Audio – VXi-HUB JLid Comm & Optical Audio Network Hub for VXi Amplifiers
JLid Comm & Optical Audio Network Hub for VXi Amplifiers
The VXi amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of its integrated DSP technology. VXi-HUB is an accessory designed to simplify the control of a networked amplifier system, while greatly easing the setup process, by allowing all amplifiers to appear in a single TüN software session.
VXi-HUB performs two distinct functions as part of a system employing two or more VXi amplifiers: data networking and digital audio distribution.
Data networking is the primary function of the VXi-HUB, permitting a network of VXi amplifiers to respond to synchronized commands from a single DRC controller (DRC-100, DRC-200 or DRC-205, all sold separately). These commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection.
The VXi-HUB also enables the networked VXi amplifiers to be tuned from within a single TüN software session, allowing the user to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
For data networking purposes, the VXi-HUB is equipped with one Master and five Slave JLid-COMM connections, permitting the networking of up to six VXi amplifiers using standard CAT5e cables (one master amplifier and five slave amplifiers). For more complex systems, two VXI-HUBs can be daisy-chained to create a network of up to ten VXi amplifiers (one master amplifier and nine slave amplifiers).
VXi-HUB also includes a dedicated JLid-COMM accessory port to allow the connection of the optional VXi-BTC Bluetooth Communicator (sold separately). This accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
The secondary function of the VXi-HUB is to distribute synchronous optical digital audio signals to the networked amplifiers, avoiding the delays associated with handing digital signals off through a chain of amplifiers. The optical digital audio output of a source unit connects directly to the VXi-HUB’s Optical Audio Input, which then distributes synchronous digital audio to the amplifiers from its five Optical Outputs. VXi-HUB handles S/PDIF signals up to 24 bits/192 kHz.
For ease of connection, the VXi-HUB is powered via the JLid connection to VXI amplifiers and requires no separate power or turn-on wiring.
VXi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs / 1 Accessory Port
- Optical Audio (S/PDIF) Connections: 1 Input / 5 Synchronous Outputs
- 3-Way Configuration Switch: Standalone / Primary / Secondary
- Amp Identifier Status LEDs
- Powered via JLid connection to VXi amplifiers
SKU: JL Audio - VXi-HUB - Car and Marine Accessories
JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
SKU: JL Audio - MVi-DRCADAPT - Car and Marine Accessories
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
SKU: JL Audio - MVi-HUB
