No products in the cart.
JL Audio – MBT-RXv2 Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
$49.99
Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system.
Equipped with BLUETOOTH wireless technology and the Qualcomm aptX HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS).
Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
Water-resistant Audio Receiver with BLUETOOTH Wireless Technology
The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system.
Equipped with BLUETOOTH wireless technology and the Qualcomm aptX HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS).
Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – XD-RT4-4PAK Ring Terminals 4 AWG Premium Series Crimpable Ring Terminals – 4 Pack
Car and Marine AccessoriesJL Audio – XD-RT4-4PAK Ring Terminals 4 AWG Premium Series Crimpable Ring Terminals – 4 Pack
JL Audio Four 4 AWG Crimpable Ring Terminals with two red & two black insulators
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
SKU: JL Audio - XD-RT4-4PAK - Car and Marine Accessories
JL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
Car and Marine AccessoriesJL Audio – FiX-LSA-4 4-Ch. Load Sensing Adaptor for use with FiX OEM Integration DSP
4-Ch. Load-Sensing Adaptor for use with FiX 82 or FiX 86 OEM Integration DSP
Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX DSP, is connected to these factory amplifiers, the audio signal will mute.
The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX is connected to more than four channels of audio from your OEM head unit or amplifier.
SKU: JL Audio - FiX-LSA-4 - Car and Marine Accessories
JL Audio – Black Knob Replacement Black Knob for CL441dsp, CL-RLC, HD-RLC, RBC-1 & M-RBC-1
Car and Marine AccessoriesJL Audio – Black Knob Replacement Black Knob for CL441dsp, CL-RLC, HD-RLC, RBC-1 & M-RBC-1
Black ABS Replacement Control Knob
This black ABS knob is a direct replacement for the knob included with the following products: CL441dsp, CL-RLC, HD-RLC, RBC-1 & M-RBC-1
Sold individually.
SKU: JL Audio - Black Knob - Car and Marine Accessories
JL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
Car and Marine AccessoriesJL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
Full-function, NMEA 2000 network wired remote controller with full color LCD display
The MMR-40 is a NMEA 2000 Network Controller engineered to add full-function, auxiliary control to MediaMaster source units.
Outfitted with a NMEA 2000 Micro-C connector, the MMR-40 connects to a host MediaMaster source unit in two ways:
- Direct interface with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included)
- Direct connection of one MMR-40 with one host MediaMaster source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000 network
Once connected, the MMR-40 automatically recognizes the host MediaMaster source unit and will then mirror all host source unit controls and screen info onto the MMR-40’s full-color, 2.8-inch LCD display, resulting in a complete MediaMaster user experience.
The MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments.
The MMR-40 includes the following features:
- NMEA 2000 Certified (LEN 4)
- Easy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls
- Independent day/night display themes and lighting controls
- IP66 rated for real marine duty
- Protective Sun Cover included
Note: The MMR-40 is not a stand-alone receiver and does not function without a connected MediaMaster source unit. All remote control functionality of the MMR-40 is solely derived from the host source unit. Functionality of the MMR-40 requires connection to a NMEA 2000 network or use of MMC-PN2K powered network cables (sold separately).
SKU: JL Audio - MMR-40
