No products in the cart.
JL Audio – M800/8v2 8 Ch. Class D Full-Range Marine Amplifier, 800 W
$749.00
8-Channel Class D Marine Full-Range Amplifier, 100 W x 8 @ 2 ohm / 75 W x 8 @ 4 ohm – 14.4V
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier’s channel levels from the driver’s seat.
Use it in one of many useful configurations:
– Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
– Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4, plus two 4? subwoofers with 200 W each
– Staggered Six-Channel Satellite Amp: drive two speakers with 200 W x 2 @ 4, plus four 4? speakers with 75 W each
– Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4
– Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4, plus two 4 subwoofers with 200W each
– This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
8-Channel Class D Marine Full-Range Amplifier, 100 W x 8 @ 2 ohm / 75 W x 8 @ 4 ohm – 14.4V
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier’s channel levels from the driver’s seat.
Use it in one of many useful configurations:
– Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
– Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4, plus two 4? subwoofers with 200 W each
– Staggered Six-Channel Satellite Amp: drive two speakers with 200 W x 2 @ 4, plus four 4? speakers with 75 W each
– Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4
– Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4, plus two 4 subwoofers with 200W each
– This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Related Products
Related products
- Marine Amplifiers
JL Audio – MV600/1 Monoblock Class D Marine Subwoofer Amplifier, 600 W
Monoblock Class D Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω – 14.4V
MV monoblock subwoofer amplifiers are engineered to deliver outstanding bass performance and fidelity, with exceptional efficiency in marine applications.
All MV monoblock amplifiers are specifically designed to receive their input signals from the pre-outs of a full-range MVi amplifier, from which they will also receive all signal processing. For this reason, MV monoblock amplifiers have no onboard signal processing, other than a basic input sensitivity setting.
Instead of traditional control knobs and switches, MV amplifiers are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN Software application installed.
Equipped with an exclusive, low-frequency variant of our NexD2 switching amplifier technology, the MV600/1 monoblock subwoofer amplifier generates up to 400 watts into 4 ohms, or a powerful 600 watts into 2 ohms. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV600/1 is outfitted with corrosion-resistant hardware and connectors.
Amplifier includes: Power Connector (for 4 AWG wire), Subwoofer Output Harness, 6 ft A/B USB Cable
Features:
Simple Setup via PC, Tablet or Smartphone
- TüN Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN software is available for computers and most handheld devices.
2nd-Gen NexD2 Switching Amplifier Technology
- Advanced, high-speed switching technology delivers superb low frequency power and efficiency.
- Latest generation of DirectFET MOSFET Output Devices.
- Specially optimized for subwoofer applications.
Ultra-Versatile Analog and Digital Inputs/Outputs
- Differential-Balanced Analog Inputs accept a wide range of signals levels (up to 8V RMS), offering outstanding noise rejection for clean, clear audio.
- Analog, Pass-Through Pre-Outs (4V RMS)
JLid System Command and Control with Networking Capabilities
- Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid accessories, including:
VXi-BTC Bluetooth Communicator: Adds wireless connectivity for amplifier configuration from a compatible iOS or Android device.
M-DRC-50 or DRC Controllers: Wired remotes offer preset selection and adjustments of levels, fader and balance from the helm or driver’s seat. (Connectivity/functionality varies by model.)MVi-HUB JLid-COMM and Network Hub: Provides network connectivity for up to six MVi amplifiers (one master and five slave amplifiers) for full-system DRC control and Preset selection.SKU: JL Audio - MV600/1 - Marine Amplifiers, Marine Speakers
JL Audio – SLPK-YA-19FXC-Gw SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
Marine Amplifiers, Marine SpeakersJL Audio – SLPK-YA-19FXC-Gw SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
Elevate your audio adventures with this exclusive SlamPack system made for Yamaha’s latest FX WaveRunner.
This system includes a pair of weatherproof VEX pods with 6.5-inch marine coaxial speakers and a compact, 600W marine system amplifier. The MBT-CRXv2 Bluetooth controller/receiver wirelessly connects to your compatible device for handsfree streaming of your favorite audio tracks. Also includes marine-grade mounting hardware and model specific wiring. Can be combined with the optional JL Audio FX Subwoofer kit (sold separately) for the ultimate PWC experience.
This SlamPak includes:
1 pr. VEX Speaker Systems with M3-650X-S-Gw 6.5-inch Marine Coaxial Speakers
1 ea. MX600/3 3-Channel Class D Marine System Amplifier*
1 ea. MBT-CRXv2 Weatherproof Bluetooth® Audio Controller/Receiver
All System Wiring and Hardware*Note: For optimum performance and reliability, all amplifier controls have been preset for this SlamPak and sealed beneath the control panel cover. No further adjustment is necessary.
Yamaha Part Number: F3X-H81C0-R0-00
SKU: JL Audio - SLPK-YA-19FXC-Gw - Marine Amplifiers
JL Audio MX600/3 Marine/powersports 3-channel amplifier — 75 watts RMS x 2 at 4 ohms + 400 watts RMS x 1 at 2 ohms
Marine AmplifiersJL Audio MX600/3 Marine/powersports 3-channel amplifier — 75 watts RMS x 2 at 4 ohms + 400 watts RMS x 1 at 2 ohms
3-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 Ω / 75 W x 2 + 250 W x 1 @ 4 Ω – 14.4V
Engineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum housing is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a potent 75W x 2 into 4 ohms, plus a solid 400 watts for a subwoofer system, the MX600/3 makes a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.
Onboard filters include a 12 dB / octave high-pass crossover on the main channels and a dedicated 24 dB / octave low-pass crossover for the subwoofer channel. Other features include a bass boost EQ, variable infrasonic filter and subwoofer output polarity switch. A dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
SKU: JL Audio-MX600/3 - Car Amplifiers, Marine Amplifiers
JL Audio XDM1000/5 5-channel car/marine amplifier — 75 watts RMS x 4 at 4 ohms + 600 watts RMS x 1 at 2 ohms
Car Amplifiers, Marine AmplifiersJL Audio XDM1000/5 5-channel car/marine amplifier — 75 watts RMS x 4 at 4 ohms + 600 watts RMS x 1 at 2 ohms
5-Channel Class D Car/Marine System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω – 14.4V
The XDM1000/5 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a stout 600 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.
Suitable for car or boat installations, the XDM1000/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM1000/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier’s filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An “x10” multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver’s seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL Audio-XDM1000/5
There are no reviews yet.