No products in the cart.
JL Audio – M800/8v2 8 Ch. Class D Full-Range Marine Amplifier, 800 W
$749.00
8-Channel Class D Marine Full-Range Amplifier, 100 W x 8 @ 2 ohm / 75 W x 8 @ 4 ohm – 14.4V
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier’s channel levels from the driver’s seat.
Use it in one of many useful configurations:
– Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
– Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4, plus two 4? subwoofers with 200 W each
– Staggered Six-Channel Satellite Amp: drive two speakers with 200 W x 2 @ 4, plus four 4? speakers with 75 W each
– Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4
– Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4, plus two 4 subwoofers with 200W each
– This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
8-Channel Class D Marine Full-Range Amplifier, 100 W x 8 @ 2 ohm / 75 W x 8 @ 4 ohm – 14.4V
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier’s channel levels from the driver’s seat.
Use it in one of many useful configurations:
– Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
– Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4, plus two 4? subwoofers with 200 W each
– Staggered Six-Channel Satellite Amp: drive two speakers with 200 W x 2 @ 4, plus four 4? speakers with 75 W each
– Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4
– Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4, plus two 4 subwoofers with 200W each
– This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Related Products
Related products
- Marine Amplifiers
JL Audio – MV600/6i 6 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 600 W
Marine AmplifiersJL Audio – MV600/6i 6 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 600 W
6-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω – 14.4V
Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2 switching amplifier technology with an integrated, full-featured digital signal processor.
Outfitted with our second-generation NexD2 technology, the MV400/4i produces up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, generating up to 200 W x 3.
The NexD2 full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV600/6i is outfitted with corrosion-resistant hardware and connectors..
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Speaker Output Harnesses (3), 6 ft A/B USB Cable
Features:
Unprecedented, Onboard DSP Tuning Power!
- Powerful DSP permits optimizing each channel’s timing, frequency response and output levels, for exceptional sound quality.
- TüN Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN software is available for computers and most handheld devices.
2nd-Gen NexD2 Switching Amplifier Technology
- Advanced, high-speed switching technology delivers reference-grade power and efficiency.
- DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion.
Ultra-Versatile Analog and Digital Inputs/Outputs
- Differential-Balanced Analog Inputs accept a wide range of signals levels (up to 16V RMS), offering outstanding noise rejection for clean, clear audio.
- Analog Pre-Outs, with fully independent DSP processing allow sharing DSP capabilities with other amplifiers in the system (4V RMS Max)
JLid System Command and Control with Networking Capabilities
- Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid accessories, including:
VXi-BTC Bluetooth® Communicator: Adds wireless connectivity for amplifier configuration from a compatible iOS or Android device.
M-DRC-50 (Digital Preset Controller): Offers convenient activation of up to six DSP presets from the helm.MVi-HUB JLid-COMM and Network Hub: Provides network connectivity for up to six MVi amplifiers (one master and five slave amplifiers) for full-system DRC control and Preset selection.SKU: JL Audio - MV600/6i - Car Amplifiers, Marine Amplifiers
JL Audio XDM1000/1 Mono car/marine subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms
Car Amplifiers, Marine AmplifiersJL Audio XDM1000/1 Mono car/marine subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms
Monoblock Class D Car/Marine Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω – 14.4V
This monoblock subwoofer powerhouse employs our high-speed NexD switching technology to achieve unprecedented efficiency and amazing power output from a very compact chassis. The XDM1000/1 generates up to 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.
Designed for car or boat installations, the XDM1000/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Intended specifically for subwoofer applications, the XDM1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL Audio-XDM1000/1 - Car Amplifiers, Marine Amplifiers
JL Audio XDM200/2 2-channel car/marine amplifier — 75 watts RMS x 2
Car Amplifiers, Marine AmplifiersJL Audio XDM200/2 2-channel car/marine amplifier — 75 watts RMS x 2
2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω – 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL Audio-XDM200/2 - Car Amplifiers, Marine Amplifiers
JL Audio XDM300/1 Mono car/marine subwoofer amplifier — 300 watts RMS x 1 at 2 ohms
Car Amplifiers, Marine AmplifiersJL Audio XDM300/1 Mono car/marine subwoofer amplifier — 300 watts RMS x 1 at 2 ohms
Monoblock Class D Car/Marine Subwoofer Amplifier, 300 W x 1 @ 2 Ω / 200 W x 1 @ 4 Ω – 14.4V
This little monoblock powerhouse employs our high-speed NexD switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).
Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL Audio-XDM300/1
There are no reviews yet.