No products in the cart.
JL Audio – M-DRC-50 Digital Preset Controller for JLid compatible products
$129.99
Digital Preset Controller for JLid compatible products
The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid port of compatible JL Audio electronics.
Features:
- Provides easy, push-button selection of stored DSP presets for compatible JL Audio electronics
- Built-in RGB LED indicator displays selected preset by color
- Weatherproof construction (IP66 rated, from the front, when properly installed)
- One-hole mount design accommodates panels up to 3/4″ (19 mm) thick
- 18 ft. (5.5 m) control cable included, with protective connection sleeve
- Powered via the JLid connection; separate power wiring is not needed.
The M-DRC-50 is compatible with the following JL Audio products:
MVi-HUB: Connects to the JLid COMM Port
MVi Amplifiers*: Connects to the JLid COMM Port
*Not compatible with mono MV amplifiers.
Digital Preset Controller for JLid compatible products
The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid port of compatible JL Audio electronics.
Features:
- Provides easy, push-button selection of stored DSP presets for compatible JL Audio electronics
- Built-in RGB LED indicator displays selected preset by color
- Weatherproof construction (IP66 rated, from the front, when properly installed)
- One-hole mount design accommodates panels up to 3/4″ (19 mm) thick
- 18 ft. (5.5 m) control cable included, with protective connection sleeve
- Powered via the JLid connection; separate power wiring is not needed.
The M-DRC-50 is compatible with the following JL Audio products:
MVi-HUB: Connects to the JLid COMM Port
MVi Amplifiers*: Connects to the JLid COMM Port
*Not compatible with mono MV amplifiers.
Brand
JL Audio
Related Products
Related products
- Remote Level Control
JL Audio – RBC-1 Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:
PowerWedge+: All Models
MicroSub+: All ModelsWhen the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
SKU: JL Audio - RBC-1 - Remote Level Control
JL Audio – M-RBC-1 Water-Resistant Remote Bass Control
Water-Resistant Remote Level Control for MX Monoblock Amplifiers or any JL Audio Monoblock with a “Remote Bass Control” port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
MX-Series: MX300/1 (in Low Pass Mode)
MX-Series: MX500/1 (in Low Pass Mode)
MX-Series: MX600/3 (Subwoofer Channel)
HX-Series (discontinued): HX300/1 (in Low Pass Mode)
MHX-Series (discontinued): MHX300/1 (in Low Pass Mode)The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D ( also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the M-RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.
SKU: JL Audio - M-RBC-1 - Remote Level Control
JL Audio – MMR-11W-REMOTE Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
Remote Level ControlJL Audio – MMR-11W-REMOTE Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
Includes transmitter, quick release lanyard and mounting cradle. MMR-11W-Remote transmitter includes a replaceable CR2032 battery.
SKU: JL Audio - MMR-11W-REMOTE - Remote Level Control
JL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
Remote Level ControlJL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
Round, wired, non-display remote controller for use with MediaMaster
The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster source units.
Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster source unit.
A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.
MediaMaster remote control capabilities include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Radio)
- Play/Pause (USB & BT)
- Mute/Unmute (Radio & Aux)
The MMR-20-BE is compatible with these MediaMaster source units:
- MM105
- MM100s-BE
- MM100s
- MM50
Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.
SKU: JL Audio - MMR-20-BE
