No products in the cart.
JL Audio – DRC-205 Digital Remote Control for JLid compatible products
$129.99
Digital Remote Control for JLid compatible products
The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Dual-concentric rotary controls with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to.
The DRC-205 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
TwK System Tuning DSP: All models
VXi-Series Amplifiers: All models
Digital Remote Control for JLid compatible products
The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Dual-concentric rotary controls with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to.
The DRC-205 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
TwK System Tuning DSP: All models
VXi-Series Amplifiers: All models
Brand
JL Audio
Related Products
Related products
- Remote Level Control
JL Audio – RBC-1 Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:
PowerWedge+: All Models
MicroSub+: All ModelsWhen the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
SKU: JL Audio - RBC-1 - Remote Level Control
JL Audio – MLC-RW Marine Lighting Controller
Marine Lighting Controller
The MLC-RW is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the MLC-RW produces up to 30 amps (400 watts) of continuous output to power modern, multi-LED networks.
All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in WiFi connection.
Note: Wireless functionality requires your compatible iOS or Android device and the LiteWave ITI app. The MLC-RW also includes a suite of onboard safety features, including automatic over-current and short-circuit protection, as well as voltage and temperature monitoring.
SKU: JL Audio - MLC-RW - Remote Level Control
JL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
Remote Level ControlJL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
Wireless, NMEA 2000 Remote Controller System for use with MediaMaster
(Note: This product is designed to connect directly to the NMEA 2000 connector of your MediaMaster only.)Utilizing state-of-the-art, wireless technology, the MMR-11W NMEA 2000 Remote Controller System delivers the ultimate in handheld control functionality for your MediaMaster.
Operating at an ultra-high frequency of 2.4 GHz, the MMR-11W’s key-fob style transmitter and receiver module permit long-range, wireless control of your NMEA 2000® equipped MediaMaster source unit, from up to 150 ft. (45 m) away. The MMR-11W transmitter features a sealed, water-resistant (IP67 rated) design, that floats with large, raised buttons for easy, on-the-move access. A verification LED is also integrated within the transmitter to provide real-time, visual confirmation (2-way) of broadcasted signals. The hideaway receiver module easily connects directly to your MediaMaster and is programmable, with the ability to add additional (up to twenty) MMR-11W-Remote transmitters (sold separately).
Both transmitter and receiver module are constructed using UV and salt-water rated materials and built to withstand the outdoor elements. For added convenience, a quick-release lanyard and mounting cradle are also included. The cradle’s versatile design permits installation to any flat surface or a tubular structure, such as a pipe/rail or steering wheel. MMR-11W transmitter includes replaceable CR2032 battery.
MediaMaster remote control functions include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Tuner)
- Play/Pause (USB & BT)
- Mute/Unmute (Tuner & Aux)
SKU: JL Audio - MMR-11W - Remote Level Control
JL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
Remote Level ControlJL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
Round, wired, non-display remote controller for use with MediaMaster
The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster source units.
Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster source unit.
A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.
MediaMaster remote control capabilities include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Radio)
- Play/Pause (USB & BT)
- Mute/Unmute (Radio & Aux)
The MMR-20-BE is compatible with these MediaMaster source units:
- MM105
- MM100s-BE
- MM100s
- MM50
Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.
SKU: JL Audio - MMR-20-BE
