JL Audio – DRC-100 Digital Remote Control for JLid compatible products
$84.99
Digital Remote Control for JLid compatible products
The DRC-100 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Rotary knob with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-100 controller will be determined by the device it is connected to.
The DRC-100 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
VXi-Series Amplifiers: All models
Digital Remote Control for JLid compatible products
The DRC-100 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Rotary knob with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-100 controller will be determined by the device it is connected to.
The DRC-100 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
VXi-Series Amplifiers: All models
Related Products
Related products
- Remote Level Control
JL Audio – CL-RLC Remote Level Control / Line Driver
0 out of 5(0)Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs
The Possibilities are Endless…
The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
SKU: JL Audio - CL-RLC - Remote Level Control
JL Audio – DRC-205 Digital Remote Control for JLid compatible products
0 out of 5(0)Digital Remote Control for JLid compatible products
The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics.
Functions:
- Dual-concentric rotary controls with stops
- Push-button mode selector
- Status indicator (RGB LED)
Common uses include:
- Master Volume
- Subwoofer Volume
- Preset or Mode Selection
The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to.
The DRC-205 is compatible with the following JL Audio products:
FiX OEM Integration DSP: All models
TwK System Tuning DSP: All models
VXi-Series Amplifiers: All modelsSKU: JL Audio - DRC-205 - Remote Level Control
JL Audio – M-RBC-1 Water-Resistant Remote Bass Control
0 out of 5(0)Water-Resistant Remote Level Control for MX Monoblock Amplifiers or any JL Audio Monoblock with a “Remote Bass Control” port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
MX-Series: MX300/1 (in Low Pass Mode)
MX-Series: MX500/1 (in Low Pass Mode)
MX-Series: MX600/3 (Subwoofer Channel)
HX-Series (discontinued): HX300/1 (in Low Pass Mode)
MHX-Series (discontinued): MHX300/1 (in Low Pass Mode)The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D ( also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the M-RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.
SKU: JL Audio - M-RBC-1 - Remote Level Control
JL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
Remote Level ControlJL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
0 out of 5(0)Wireless, NMEA 2000 Remote Controller System for use with MediaMaster
(Note: This product is designed to connect directly to the NMEA 2000 connector of your MediaMaster only.)Utilizing state-of-the-art, wireless technology, the MMR-11W NMEA 2000 Remote Controller System delivers the ultimate in handheld control functionality for your MediaMaster.
Operating at an ultra-high frequency of 2.4 GHz, the MMR-11W’s key-fob style transmitter and receiver module permit long-range, wireless control of your NMEA 2000® equipped MediaMaster source unit, from up to 150 ft. (45 m) away. The MMR-11W transmitter features a sealed, water-resistant (IP67 rated) design, that floats with large, raised buttons for easy, on-the-move access. A verification LED is also integrated within the transmitter to provide real-time, visual confirmation (2-way) of broadcasted signals. The hideaway receiver module easily connects directly to your MediaMaster and is programmable, with the ability to add additional (up to twenty) MMR-11W-Remote transmitters (sold separately).
Both transmitter and receiver module are constructed using UV and salt-water rated materials and built to withstand the outdoor elements. For added convenience, a quick-release lanyard and mounting cradle are also included. The cradle’s versatile design permits installation to any flat surface or a tubular structure, such as a pipe/rail or steering wheel. MMR-11W transmitter includes replaceable CR2032 battery.
MediaMaster remote control functions include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Tuner)
- Play/Pause (USB & BT)
- Mute/Unmute (Tuner & Aux)
SKU: JL Audio - MMR-11W






