JL Audio CP212-W0v3 BassWedge slot-ported enclosure with two 12″ W0v3 subwoofers
$399.99
Enclosed Subwoofer System with Dual 12W0v3-4 Subwoofers, Dark Gray Carpet (600 W, 2 Ω) – Ported Enclosure
This powerful slot-ported BassWedge subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with “JL AUDIO” embroidery on the top edge and “Slot-Ported BassWedge” embroidered on the port mouth.
Construction: MDF
Recommended amplifier power: 150 – 600W
Nominal Impedance: 2 Ω
| Continuous Power Handling (RMS) | 600 W |
| System Nominal Impedance | 2 Ω |
| Enclosure Type | Slot-ported |
| Finish | Gray carpet |
| Grille Included | No |
| External Width (W) | 31.375 in / 797 mm |
| External Height (H) | 15.18 in / 386 mm |
| External Depth (D1) | 20.3 in / 516 mm |
| External Top Surface Depth (D2) | 15.75 in / 400 mm |
| Net Weight | 60.3 lb / 27.35 kg |
Enclosed Subwoofer System with Dual 12W0v3-4 Subwoofers, Dark Gray Carpet (600 W, 2 Ω) – Ported Enclosure
This powerful slot-ported BassWedge subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with “JL AUDIO” embroidery on the top edge and “Slot-Ported BassWedge” embroidered on the port mouth.
Construction: MDF
Recommended amplifier power: 150 – 600W
Nominal Impedance: 2 Ω
| Continuous Power Handling (RMS) | 600 W |
| System Nominal Impedance | 2 Ω |
| Enclosure Type | Slot-ported |
| Finish | Gray carpet |
| Grille Included | No |
| External Width (W) | 31.375 in / 797 mm |
| External Height (H) | 15.18 in / 386 mm |
| External Depth (D1) | 20.3 in / 516 mm |
| External Top Surface Depth (D2) | 15.75 in / 400 mm |
| Net Weight | 60.3 lb / 27.35 kg |
Related Products
Related products
-
Car Subwoofers & enclosures
JL Audio – 12W1V3-4 12-inch Subwoofer Driver, 4 ohm
0 out of 5(0)W1v3 12-inch Subwoofer (300 W, 4 ohm)
The 12W1v3 is a lightweight 12-inch driver with excellent performance capabilities at moderate power levels. It features moderate mounting depth with no pole-vent, so the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 12W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure.
SKU: JL AUDIO - 12W1V3-4 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-2 10-inch Subwoofer Driver, 2 ohm
0 out of 5(0)W1v3 10-inch Subwoofer (300 W, 2 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-2 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-2 -
Car Subwoofers & enclosures
JL Audio – 10W3v3-2 10-inch Subwoofer Driver, 2 ohm
0 out of 5(0)W3v3 10-inch Subwoofer (500 W, 2 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-2 -
Car Subwoofers & enclosures
JL Audio 12W6v3-D4 12-inch Subwoofer Driver, Dual 4 ohm
0 out of 5(0)W6v3 12-inch Subwoofer (600 W, dual 4 ohm voice coils)
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 12W6v3 is best used with amplifier power in the 200W – 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure.
Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 ? voice coils permit deploying the W6v3 as a 2 ohm or 8 ohm driver.SKU: JL AUDIO - 12W6V3-D4







