JL Audio – CL-RLC Remote Level Control / Line Driver
$84.99
Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs
The Possibilities are Endless…
The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs
The Possibilities are Endless…
The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
Related Products
Related products
- Remote Level Control
JL Audio – M-RBC-1 Water-Resistant Remote Bass Control
0 out of 5(0)Water-Resistant Remote Level Control for MX Monoblock Amplifiers or any JL Audio Monoblock with a “Remote Bass Control” port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
MX-Series: MX300/1 (in Low Pass Mode)
MX-Series: MX500/1 (in Low Pass Mode)
MX-Series: MX600/3 (Subwoofer Channel)
HX-Series (discontinued): HX300/1 (in Low Pass Mode)
MHX-Series (discontinued): MHX300/1 (in Low Pass Mode)The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D ( also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the M-RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.
SKU: JL Audio - M-RBC-1 - Remote Level Control
JL Audio – MMR-11W-REMOTE Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
Remote Level ControlJL Audio – MMR-11W-REMOTE Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
0 out of 5(0)Replacement or Add-on Transmitter (only) for use with MMR-11W and MMR-11W-N2K Systems
Includes transmitter, quick release lanyard and mounting cradle. MMR-11W-Remote transmitter includes a replaceable CR2032 battery.
SKU: JL Audio - MMR-11W-REMOTE - Remote Level Control
JL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
Remote Level ControlJL Audio – MMR-11W Wireless, NMEA 2000 Remote Controller System for use with MediaMaster (connects to your MediaMaster only)
0 out of 5(0)Wireless, NMEA 2000 Remote Controller System for use with MediaMaster
(Note: This product is designed to connect directly to the NMEA 2000 connector of your MediaMaster only.)Utilizing state-of-the-art, wireless technology, the MMR-11W NMEA 2000 Remote Controller System delivers the ultimate in handheld control functionality for your MediaMaster.
Operating at an ultra-high frequency of 2.4 GHz, the MMR-11W’s key-fob style transmitter and receiver module permit long-range, wireless control of your NMEA 2000® equipped MediaMaster source unit, from up to 150 ft. (45 m) away. The MMR-11W transmitter features a sealed, water-resistant (IP67 rated) design, that floats with large, raised buttons for easy, on-the-move access. A verification LED is also integrated within the transmitter to provide real-time, visual confirmation (2-way) of broadcasted signals. The hideaway receiver module easily connects directly to your MediaMaster and is programmable, with the ability to add additional (up to twenty) MMR-11W-Remote transmitters (sold separately).
Both transmitter and receiver module are constructed using UV and salt-water rated materials and built to withstand the outdoor elements. For added convenience, a quick-release lanyard and mounting cradle are also included. The cradle’s versatile design permits installation to any flat surface or a tubular structure, such as a pipe/rail or steering wheel. MMR-11W transmitter includes replaceable CR2032 battery.
MediaMaster remote control functions include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Tuner)
- Play/Pause (USB & BT)
- Mute/Unmute (Tuner & Aux)
SKU: JL Audio - MMR-11W - Remote Level Control
JL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
Remote Level ControlJL Audio – MMR-20-BE Round, wired, non-display remote controller for use with MediaMaster
0 out of 5(0)Round, wired, non-display remote controller for use with MediaMaster
The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster source units.
Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster source unit.
A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.
MediaMaster remote control capabilities include:
- Power On/Off
- Source Select
- Volume Up/Down
- Track Up/Down (USB & BT)
- Track Fast-Forward/Fast-Rewind (USB)
- Favorite Up/Down (Radio)
- Play/Pause (USB & BT)
- Mute/Unmute (Radio & Aux)
The MMR-20-BE is compatible with these MediaMaster source units:
- MM105
- MM100s-BE
- MM100s
- MM50
Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.
SKU: JL Audio - MMR-20-BE