No products in the cart.
JL Audio ACP112LG-TW1 MicroSub+ powered subwoofer with 12″ sub and 400-watt amp
$899.99
Amplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet – Ported Enclosure
With MicroSub+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 12TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.
Note: DCD amplified systems use very specific components. Never use a DCD amplifier or its companion subwoofer(s) with incompatible, non-DCD products. Doing so will void the warranty and may cause severe damage.
Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.
Construction: CNC-Cut High-Grade MDF
Amplifier power: Built-in DCD Class D amplifier (400 W @ 0.25 Ω)
Nominal Impedance: 0.25 Ω
Enclosure and Subwoofer Built in USA with global components
GENERAL SPECIFICATIONS
| Continuous Power Handling (RMS) | Built-in amplifier 400 W @ 0.25 Ω |
| System Nominal Impedance | 0.25 Ω |
| Input Voltage Range @ RCA Inputs | 70 mV – 1.40 V RMS |
| Input Voltage Range @ High-Level Inputs | 280 mV – 5.4 V RMS |
| Recommended Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (ATO or ATC) |
| Enclosure Type | Slot-ported, Low-profile |
| Finish | Black carpet |
| Grille Included | Black Steel Mesh |
SIGNAL PROCESSING
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz – 200 Hz |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (RBC-1) |
PHYSICAL SPECIFICATIONS
| External Width (W) | 23.75 in / 603 mm |
| External Height (H) | 15.75 in / 400 mm |
| External Depth (D) | 9.25 in / 235 mm |
| Net Weight | 40.4 lb / 18.33 kg |
Amplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet – Ported Enclosure
With MicroSub+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 12TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.
Note: DCD amplified systems use very specific components. Never use a DCD amplifier or its companion subwoofer(s) with incompatible, non-DCD products. Doing so will void the warranty and may cause severe damage.
Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.
Construction: CNC-Cut High-Grade MDF
Amplifier power: Built-in DCD Class D amplifier (400 W @ 0.25 Ω)
Nominal Impedance: 0.25 Ω
Enclosure and Subwoofer Built in USA with global components
GENERAL SPECIFICATIONS
| Continuous Power Handling (RMS) | Built-in amplifier 400 W @ 0.25 Ω |
| System Nominal Impedance | 0.25 Ω |
| Input Voltage Range @ RCA Inputs | 70 mV – 1.40 V RMS |
| Input Voltage Range @ High-Level Inputs | 280 mV – 5.4 V RMS |
| Recommended Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (ATO or ATC) |
| Enclosure Type | Slot-ported, Low-profile |
| Finish | Black carpet |
| Grille Included | Black Steel Mesh |
SIGNAL PROCESSING
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz – 200 Hz |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (RBC-1) |
PHYSICAL SPECIFICATIONS
| External Width (W) | 23.75 in / 603 mm |
| External Height (H) | 15.75 in / 400 mm |
| External Depth (D) | 9.25 in / 235 mm |
| Net Weight | 40.4 lb / 18.33 kg |
Brand
JL Audio
Related Products
Related products
- Car Subwoofers & enclosures
JL Audio – 15W0V3-4 15-inch Subwoofer Driver, 4 ohm
W0v3 15-inch Subwoofer (500 W, 4 ohm)
Sometimes, bigger is better… For these situations, the 15W0v3 offers excellent excursion capability, linearity and an overall performance envelope that puts it right at the top of its price class. It features a very beefy 2.5 in. diameter voice coil and our Elevated Frame Cooling design for enhanced power handling and reliability.
The 15W0v3 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a moderately sized 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.75 cu. ft. (77.88 l) ported enclosure.
SKU: JL AUDIO - 15W0V3-4 - Car Subwoofers & enclosures
JL Audio – 10W0V3-4 10-inch Subwoofer Driver, 4 ohm
W0v3 10-inch Subwoofer (300 W, 4 ohm)
The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our Elevated Frame Cooling design for enhanced power handling and reliability.
The 10W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure.
SKU: JL AUDIO - 10W0V3-4 - Car Subwoofers & enclosures
JL Audio – 10TW3-D8 10-inch Subwoofer Driver, Dual 8 ohm
TW3 10-inch Subwoofer (400 W, dual 8 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3?s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logoSKU: JL AUDIO - 10TW3-D8 - Car Subwoofers & enclosures
JL Audio – 10W3V3-4 10-inch Subwoofer Driver, 4 ohm
W3v3 10-inch Subwoofer (500 W, 4 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-4 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-4
