DB Drive – WDX7MR6 – WDX 7 Series 6.5in PRO Audio Midrange Speaker
$70.00
Power Up Your Sound with DB Drive WDX 7 Series!
Introducing the DB Drive WDX 7 Series 6.5in PRO Audio Midrange – your ultimate solution for impeccable audio performance! Equipped with a robust copper voice coil wire and a durable polyimide coil, this powerhouse delivers an extraordinary sound experience. With a ferrite magnet and stamped steel basket, the WDX 7 Series ensures maximum efficiency and durability. Its paper cone material and cone edge cloth offer a perfect blend of strength and flexibility, enhancing the overall sound quality. Boasting a max power of 325 watts and a nominal power of 200 watts, along with an impressive sensitivity of 97.2 @ 1W/1M, this midrange driver is designed to elevate your audio system to new heights. Experience the clarity, power, and precision of the DB Drive WDX 7 Series – where quality meets performance!
SPECIFICATIONS
Structure: 6.5” (16.51 cm) Mid-Range
Max Power: 325 Watts
Nominal Power: 200 Watts
Impedance: 4Ω
Sensitivity: 97.2 dB
Power Up Your Sound with DB Drive WDX 7 Series!
Introducing the DB Drive WDX 7 Series 6.5in PRO Audio Midrange – your ultimate solution for impeccable audio performance! Equipped with a robust copper voice coil wire and a durable polyimide coil, this powerhouse delivers an extraordinary sound experience. With a ferrite magnet and stamped steel basket, the WDX 7 Series ensures maximum efficiency and durability. Its paper cone material and cone edge cloth offer a perfect blend of strength and flexibility, enhancing the overall sound quality. Boasting a max power of 325 watts and a nominal power of 200 watts, along with an impressive sensitivity of 97.2 @ 1W/1M, this midrange driver is designed to elevate your audio system to new heights. Experience the clarity, power, and precision of the DB Drive WDX 7 Series – where quality meets performance!
SPECIFICATIONS
Structure: 6.5” (16.51 cm) Mid-Range
Max Power: 325 Watts
Nominal Power: 200 Watts
Impedance: 4Ω
Sensitivity: 97.2 dB
Brand
DB Drive
Related Products
Related products
-
Car Speakers
JL Audio C3-600 Evolution C3 Series 6 inch convertible component speaker system
2-Way Convertible Component / Coaxial System: 6-inch (150 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker.
The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold as a pair.
SKU: JL Audio-C3-600 -
Car Speakers, Car Subwoofers & enclosures
JL Audio C6-650cw C6 6.5 inch component woofer (Single)
6.5 inch (165 mm) Component Woofer (with Grille)
Born from shared technologies used in our flagship C7 speakers, the C6-650cw component woofer benefits from vast woofer design experience and advanced modeling systems of JL Audio.
Ideal for active systems, the C6-650cw component woofer features a proprietary cast alloy frame outfitted with our Elevated Frame Cooling™ technology and a DMA-optimized motor system to generate outstanding midbass impact with ultralow distortion.
Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor, such as the JL Audio TwK DSP, or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.
C6-650cw Component Woofer Features:
• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response
• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
• Cast alloy frame with our Elevated Frame Cooling feature
• Includes fine mesh grilleDesign Bandwidth:
With 48 dB/octave filters: 55 Hz-6 kHz
With 24 dB/octave filters: 65 Hz-6 kHz
With 12 dB/octave filters: 80 Hz-6 kHzComponent woofers are sold individually and include a plastic grille tray, one fine steel mesh grille and one electroformed JL Audio badge logo.
SKU: JL Audio-C6-650cw -
Car Speakers
JL Audio C6-100ct C6 1 inch edge-driven silk dome tweeter (Single)
1 inch (25 mm) Silk Dome Component Tweeter
Born from shared technologies used in our flagship C7 speakers, the C6-100ct component tweeter benefits from vast speaker design experience and advanced modeling systems of JL Audio.
Ideal for active systems, the C6-100ct component tweeter features an edge-driven, pure silk dome diaphragm for smooth, high-frequency performance with remarkable off-axis response and damping. A neodymium motor and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor (DSP), such as the JL Audio TwK® DSP or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.
C6-100ct Component Tweeter Features:
• Edge-driven pure-silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
• Neodymium motor delivers high magnetic flux from a compact motor design
• Ferrofluid cooling and damping improves reliability and response smoothness
• Includes surface- and flush-mount fixturesDesign Bandwidth:
With 48 dB/octave filters: 3-21 kHz
With 24 dB/octave filters: 4-21 kHz
With 12 dB/octave filters: 5-21 kHzComponent tweeters are sold individually and include surface- and flush-mount fixtures and hardware. One 15 μF tweeter protection capacitor is also included.
SKU: JL Audio-C6-100ct -
Bluetooth Speakers, Car Speakers
JBL-BASSPRO GO in-Vehicle Powered subwoofer & Full-Range Portable Bluetooth Speaker,Black
Bluetooth Speakers, Car SpeakersJBL-BASSPRO GO in-Vehicle Powered subwoofer & Full-Range Portable Bluetooth Speaker,Black
Sound that packs a punch
The BassPro Go employs a 4-1/2″ active subwoofer and a pair of 3/4″ tweeters to provide a full range of sound, plus a pair of passive radiators to reinforce the bass. Guaranteed high quality sound!Quick grab & go design
The BassPro Go includes a vehicle mounting bracket, wiring harness, and hardware ? just find a convenient spot in your cargo area or trunk where you can get to it easily when it’s time to disconnect. The BassPro Go locks in solidly to the mounting bracket while you’re traveling, and it offers high-level inputs for connecting to your car audio system.Charges when safely docked
With just one cable you can connect the BassPro Go back to your car in no time and charge it at the same time. This way you won’t run out of battery and you can stream music for up to 8 hours. Got an empty phone? With the built-in USB port you can charge mobile devices on the go!SKU: JBL-BASSPRO GO
