No products in the cart.
DB Drive – P4M 8SB – 8 inch PRO Audio Sealed Back Midrange Speaker
$89.00
Experience Sound Like Never Before with the DB Drive P4M 8SB!
Step into a world of superior audio performance with the DB Drive P4M 8SB: 8in PRO Audio Sealed Back Loud Speaker. Engineered for excellence, this speaker features a high-efficiency paper cone that delivers crisp, clear sound with every beat. The integrated protective grill ensures durability, while the barium ferrite magnet boosts power and performance. With a sensitivity of 94 dB and an impedance of 4Ω, this speaker provides an immersive auditory experience. Capable of handling a maximum power of 325 Watts, it’s built to amplify your music beyond expectations. Whether you’re an audiophile or a casual listener, the P4M 8SB is your gateway to unparalleled sound quality. Embrace the power of DB Drive and elevate your audio experience.
SPECIFICATIONS
Structure: 8″ (20.3 cm) Sealed Back Loudspeaker
Max Power: 325 Watts
Nominal Power: 200 Watts
Impedance: 4Ω
Sensitivity: 94 dB
Experience Sound Like Never Before with the DB Drive P4M 8SB!
Step into a world of superior audio performance with the DB Drive P4M 8SB: 8in PRO Audio Sealed Back Loud Speaker. Engineered for excellence, this speaker features a high-efficiency paper cone that delivers crisp, clear sound with every beat. The integrated protective grill ensures durability, while the barium ferrite magnet boosts power and performance. With a sensitivity of 94 dB and an impedance of 4Ω, this speaker provides an immersive auditory experience. Capable of handling a maximum power of 325 Watts, it’s built to amplify your music beyond expectations. Whether you’re an audiophile or a casual listener, the P4M 8SB is your gateway to unparalleled sound quality. Embrace the power of DB Drive and elevate your audio experience.
SPECIFICATIONS
Structure: 8″ (20.3 cm) Sealed Back Loudspeaker
Max Power: 325 Watts
Nominal Power: 200 Watts
Impedance: 4Ω
Sensitivity: 94 dB
Brand
DB Drive
Related Products
Related products
- Car Speakers
JL Audio C3-600 Evolution C3 Series 6 inch convertible component speaker system
2-Way Convertible Component / Coaxial System: 6-inch (150 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker.
The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold as a pair.
SKU: JL Audio-C3-600 - Car Speakers
JL Audio – C1-650 6.5-inch 2-Way Component Speaker System
2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many “6-inch” speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex spider at the top of the voice coil, to precisely control the voice coil’s motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter?s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
SKU: JL AUDIO - C1-650 - Car Speakers
JL Audio – C1-400X 4-inch Coaxial Speaker System
Coaxial Speaker System: 4-inch (100 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, breakaway mounting tabs on the woofer frame allow the C1-400x to be installed in four-hole or two-hole mounting configurations.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-400x is a proprietary, stamped, steel 4-inch (100 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
SKU: JL AUDIO - C1-400X - Car Speakers
Pioneer – TS-A1677S A-Series 6.5″ 3-Way Coaxial 320 Watts Peak Power Car Audio Speakers
Upgrade to High Performance
The main highlight of the new A-Series speakers ? improved sound and enhanced dynamic range. These redesigned speakers sport new tweeters, light-but-rigid Carbon and Mica reinforced IMPP speaker cones larger in size compared to its predecessors, and a flexible moving spider with a wider controlled excursion. All this translates into a powerful audio experience with extended high frequencies, deeper bass, and low distortion that easily outperforms factory-fitted offerings and the competition.Open and Smooth Concept
The Open & Smooth sound concept of our industry-leading speakers delivers both sonic excellence and performance. The open-staging and smooth transition of driver response makes for an immersive experience that is truly the ultimate in-car soundSKU: PIONEER - TS-A1677S
