DB Drive – P4M 6C – 6.5 inch PRO Audio Midrange Speaker
$69.00
Turn up the volume with DB Drive’s P4M 6C – Where Power Meets Precision!
Elevate your audio experience with the DB Drive P4M 6C 6.5in PRO Audio Mid-Range speaker, designed for those who demand the best in sound quality and performance. Boasting a high efficiency Pro Audio Mid-Range, this speaker ensures every note, beat, and melody is delivered with impeccable clarity and precision. Its shallow mount application makes it a versatile choice for various setups, while the cloth edge surround and high temperature voice coil contribute to its durability and longevity. With a steel stamped basket and a barium ferrite magnet, this speaker is built to last and perform at its peak. The 4Ω impedance, 275 Watts max power, and 150 Watts nominal power ensure robust and powerful sound output. With a sensitivity of 92.2 dB, the P4M 6C captures every nuance of your favorite tracks. Part of the PROAUDIO MID-RANGE series, this 6.5” (16.5cm) speaker with a 1.5” (38mm) voice coil is more than just a component; it’s a revolution in midrange audio. Experience the difference with DB Drive, where power meets precision.
SPECIFICATIONS
Structure: 6.5″ (16.5 cm) PRO Midrange
Max Power: 275 Watts
Nominal Power: 150 Watts
Impedance: 4Ω
Sensitivity: 92.2 dB
Turn up the volume with DB Drive’s P4M 6C – Where Power Meets Precision!
Elevate your audio experience with the DB Drive P4M 6C 6.5in PRO Audio Mid-Range speaker, designed for those who demand the best in sound quality and performance. Boasting a high efficiency Pro Audio Mid-Range, this speaker ensures every note, beat, and melody is delivered with impeccable clarity and precision. Its shallow mount application makes it a versatile choice for various setups, while the cloth edge surround and high temperature voice coil contribute to its durability and longevity. With a steel stamped basket and a barium ferrite magnet, this speaker is built to last and perform at its peak. The 4Ω impedance, 275 Watts max power, and 150 Watts nominal power ensure robust and powerful sound output. With a sensitivity of 92.2 dB, the P4M 6C captures every nuance of your favorite tracks. Part of the PROAUDIO MID-RANGE series, this 6.5” (16.5cm) speaker with a 1.5” (38mm) voice coil is more than just a component; it’s a revolution in midrange audio. Experience the difference with DB Drive, where power meets precision.
SPECIFICATIONS
Structure: 6.5″ (16.5 cm) PRO Midrange
Max Power: 275 Watts
Nominal Power: 150 Watts
Impedance: 4Ω
Sensitivity: 92.2 dB
Brand
DB Drive
Related Products
Related products
-
Car Speakers
JL Audio C6-100ct C6 1 inch edge-driven silk dome tweeter (Single)
1 inch (25 mm) Silk Dome Component Tweeter
Born from shared technologies used in our flagship C7 speakers, the C6-100ct component tweeter benefits from vast speaker design experience and advanced modeling systems of JL Audio.
Ideal for active systems, the C6-100ct component tweeter features an edge-driven, pure silk dome diaphragm for smooth, high-frequency performance with remarkable off-axis response and damping. A neodymium motor and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor (DSP), such as the JL Audio TwK® DSP or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.
C6-100ct Component Tweeter Features:
• Edge-driven pure-silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
• Neodymium motor delivers high magnetic flux from a compact motor design
• Ferrofluid cooling and damping improves reliability and response smoothness
• Includes surface- and flush-mount fixturesDesign Bandwidth:
With 48 dB/octave filters: 3-21 kHz
With 24 dB/octave filters: 4-21 kHz
With 12 dB/octave filters: 5-21 kHzComponent tweeters are sold individually and include surface- and flush-mount fixtures and hardware. One 15 μF tweeter protection capacitor is also included.
SKU: JL Audio-C6-100ct -
Car Speakers
JL Audio – C1-650 6.5-inch 2-Way Component Speaker System
2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many “6-inch” speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex spider at the top of the voice coil, to precisely control the voice coil’s motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter?s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
SKU: JL AUDIO - C1-650 -
Car Speakers
JL Audio – C1-525X 5.25-inch Coaxial Speaker System
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-525x is a proprietary, stamped, steel 5.25-inch (130 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
SKU: JL AUDIO - C1-525X -
Car Speakers
Pioneer – TS-A1677S A-Series 6.5″ 3-Way Coaxial 320 Watts Peak Power Car Audio Speakers
Upgrade to High Performance
The main highlight of the new A-Series speakers ? improved sound and enhanced dynamic range. These redesigned speakers sport new tweeters, light-but-rigid Carbon and Mica reinforced IMPP speaker cones larger in size compared to its predecessors, and a flexible moving spider with a wider controlled excursion. All this translates into a powerful audio experience with extended high frequencies, deeper bass, and low distortion that easily outperforms factory-fitted offerings and the competition.Open and Smooth Concept
The Open & Smooth sound concept of our industry-leading speakers delivers both sonic excellence and performance. The open-staging and smooth transition of driver response makes for an immersive experience that is truly the ultimate in-car soundSKU: PIONEER - TS-A1677S
