Product categories
-
Marine Amplifiers
JL Audio – MV700/5i 5 Ch. Class D Marine System Amplifier with Integrated DSP, 700 W
Marine AmplifiersJL Audio – MV700/5i 5 Ch. Class D Marine System Amplifier with Integrated DSP, 700 W
5-Channel Class D Marine System Amplifier with Integrated DSP, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω – 14.4V
Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2 switching amplifier technology with an integrated, full-featured digital signal processor.
Equipped with our second-generation NexD2 technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.
The NexD2 full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2 technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Speaker Output Harnesses (2), Subwoofer Output Harness, 6 ft A/B USB Cable
Features:
Unprecedented, Onboard DSP Tuning Power!
- Powerful DSP permits optimizing each channel’s timing, frequency response and output levels, for exceptional sound quality.
- TüN Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN software is available for computers and most handheld devices.
2nd-Gen NexD2 Switching Amplifier Technology
- Advanced, high-speed switching technology delivers reference-grade power and efficiency.
- DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion.
Ultra-Versatile Analog and Digital Inputs/Outputs
- Differential-Balanced Analog Inputs accept a wide range of signals levels (up to 16V RMS), offering outstanding noise rejection for clean, clear audio.
- Analog Pre-Outs, with fully independent DSP processing allow sharing DSP capabilities with other amplifiers in the system (4V RMS Max)
JLid System Command and Control with Networking Capabilities
- Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid accessories, including:
VXi-BTC Bluetooth Communicator: Adds wireless connectivity for amplifier configuration from a compatible iOS or Android device.
M-DRC-50 (Digital Preset Controller): Offers convenient activation of up to six DSP presets from the helm.MVi-HUB JLid-COMM and Network Hub: Provides network connectivity for up to six MVi amplifiers (one master and five slave amplifiers) for full-system DRC control and Preset selection.SKU: JL Audio - MV700/5i -
Marine Amplifiers
JL Audio – MV800/8i 8 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 800 W
Marine AmplifiersJL Audio – MV800/8i 8 Ch. Class D Full-Range Marine Amplifier with Integrated DSP, 800 W
8-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω – 14.4V
Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2 switching amplifier technology with an integrated, full-featured digital signal processor.
Outfitted with our second-generation NexD2 technology, the MV800/8i produces up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, generating up to 200 W x 4.
The NexD2 full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV800/8i is outfitted with corrosion-resistant hardware and connectors.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN Software application installed.
Amplifier includes: Power Connector (for 2 AWG wire), Speaker Output Harnesses (4), 6 ft A/B USB Cable
Features:
Unprecedented, Onboard DSP Tuning Power!
- Powerful DSP permits optimizing each channel’s timing, frequency response and output levels, for exceptional sound quality.
- TüN Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN software is available for computers and most handheld devices.
2nd-Gen NexD2 Switching Amplifier Technology
- Advanced, high-speed switching technology delivers reference-grade power and efficiency.
- DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion.
Ultra-Versatile Analog and Digital Inputs/Outputs
- Differential-Balanced Analog Inputs accept a wide range of signals levels (up to 16V RMS), offering outstanding noise rejection for clean, clear audio.
- Analog Pre-Outs, with fully independent DSP processing allow sharing DSP capabilities with other amplifiers in the system (4V RMS Max)
JLid System Command and Control with Networking Capabilities
- Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid accessories, including:
VXi-BTC Bluetooth Communicator: Adds wireless connectivity for amplifier configuration from a compatible iOS or Android device.
M-DRC-50 (Digital Preset Controller): Offers convenient activation of up to six DSP presets from the helm.MVi-HUB JLid-COMM and Network Hub: Provides network connectivity for up to six MVi amplifiers (one master and five slave amplifiers) for full-system DRC control and Preset selection.SKU: JL Audio - MV800/8i -
Car and Marine Accessories
JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
SKU: JL Audio - MVi-DRCADAPT -
Car and Marine Accessories
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
SKU: JL Audio - MVi-HUB -
Mounting Fixtures
JL Audio – PS-SWMCP-B-0.750 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-0.750 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 0.750
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio – PS-SWMCP-B-0.750 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-0.875 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-0.875 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 0.875
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-0.875 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.000 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.000 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.00″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.000 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.125 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.125 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.125″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.125 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.250 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.250 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.250″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.250 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.375 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.375 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.375″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.375 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.500 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.500 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.500″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.500 -
Mounting Fixtures
JL Audio – PS-SWMCP-B-1.625 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Mounting FixturesJL Audio – PS-SWMCP-B-1.625 VeX Enclosed Speaker System Swivel Mount Fixture for Pipe Mounting
Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs. Size: 1.625″
Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX Pods.
SKU: JL Audio - PS-SWMCP-B-1.625
