Ubiquiti – UAP-AC-M-US Access Point AC Mesh
$204.99
With the indoor/outdoor UAP-AC-M-US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti Networks, users benefit from a wide coverage area reaching up to 600′ along with enhanced data transfer rates of up to 867 Mb/s on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 2×2 MIMO internal antenna configuration supporting multiple data paths for a more efficient end-user network connection. Installation of the UAP-AC-M-US is simple, as it comes 802.3af PoE-compliant and includes a wall/pole/fast-mount kit. Once installed, users can take advantage of 802.11ac Wi-Fi access with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band. The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) GbE RJ45 port
Management interface:
– Ethernet
– Bluetooth
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply: Gigabit PoE adapter 24V, 0.5A*
Supported voltage range: 44?57V DC
Max. power consumption: 8.5W
Max. TX power
– 2.4 GHz: 20 dBm
– 5 GHz: 20 dBm
– 6 GHz: ?
MIMO
– 2.4 GHz: 2 x 2
– 5 GHz: 2 x 2
– 6 GHz: ?
Throughput rate
– 2.4 GHz: 300 Mbps
– 5 GHz: 867 Mbps
– 6 GHz: ?
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 4 dBi
– 6 GHz: ?
Button: Factory reset
Mounting: Wall, pole, fast-mount (Included)
Ambient operating temperature: -30 to 70? C (-22 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC, UKCA
Software
WiFi standards: 802.11a/b/g/n/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
VLAN: 802.1Q
BSSID: Up to 4 per radio
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
With the indoor/outdoor UAP-AC-M-US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti Networks, users benefit from a wide coverage area reaching up to 600′ along with enhanced data transfer rates of up to 867 Mb/s on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 2×2 MIMO internal antenna configuration supporting multiple data paths for a more efficient end-user network connection. Installation of the UAP-AC-M-US is simple, as it comes 802.3af PoE-compliant and includes a wall/pole/fast-mount kit. Once installed, users can take advantage of 802.11ac Wi-Fi access with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band. The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) GbE RJ45 port
Management interface:
– Ethernet
– Bluetooth
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply: Gigabit PoE adapter 24V, 0.5A*
Supported voltage range: 44?57V DC
Max. power consumption: 8.5W
Max. TX power
– 2.4 GHz: 20 dBm
– 5 GHz: 20 dBm
– 6 GHz: ?
MIMO
– 2.4 GHz: 2 x 2
– 5 GHz: 2 x 2
– 6 GHz: ?
Throughput rate
– 2.4 GHz: 300 Mbps
– 5 GHz: 867 Mbps
– 6 GHz: ?
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 4 dBi
– 6 GHz: ?
Button: Factory reset
Mounting: Wall, pole, fast-mount (Included)
Ambient operating temperature: -30 to 70? C (-22 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC, UKCA
Software
WiFi standards: 802.11a/b/g/n/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
VLAN: 802.1Q
BSSID: Up to 4 per radio
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Related Products
Related products
-
Wifi Extenders & Access Points
Ubiquiti – LocoM5(US) UISP airMAX NanoStationM 5 GHz loco Station
0 out of 5(0)With the 5 GHz airMAX NanoStationlocoM from Ubiquiti Networks, you can provide your clients with reliable long-range network connections. Designed to support both Point-to-MultiPoint (PtMP) and Point-to-Point (PtP) configurations, this Customer Premises Equipment (CPE) loco station features a panel antenna with dual-polarity 13 dBi gain to communicate with wireless devices over the 5 GHz signal band frequency. It also includes a 560 MHz Atheros MIPS 74Kc processor with 64MB of DDR2 memory and 8MB of flash storage, which can all be powered by connecting the included power-over-Ethernet (PoE) adapter to the 10/100 Mb/s Ethernet port to carry both data and power over a single cable. With its UV-stabilized plastic enclosure, the airMAX NanoStationloco M2 may be attached onto a pole with the included mount. Use the airOS software to configure and manage the airMAX NanoStationlocoM and its connected devices.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) 10/100 MbE RJ45 port
Power method: Passive PoE (Pairs 4, 5+; 7, 8 return)
Power supply: PoE, 24V, 0.5A
Max. power consumption: 5.5W
Ambient operating temperature: -30 to 75? C (-22 to 167? F)
Ambient operating humidity: 5 to 95% noncondensing
Shock & vibration: ETSI300-019-1.4
Certifications: FCC, IC, CE, RoHSSystem
Frequency: 5 GHz
Operating frequency:
– Worldwide: 5170-5875 MHz
– US: 5725-5850 MHz
– USA DFS: 5250-5850 MHz
Gain: 13 dBi
Cross-pol isolation: 20 dB Min.
Max. VSWR: 1.4:1
Beamwidth: 45? (H-pol) / 45? (V-pol) / 45? (Elevation)
Polarization: Dual linearSKU: UBIQUITI - LOCOM5(US)$97.99 -
Wifi Extenders & Access Points
Ubiquiti – U6-Pro-US UniFi6 Pro
0 out of 5(0)Quickly expand your business’s network with strong and reliable wireless coverage by connecting the WiFi 6 Pro Dual-Band Access Point from Ubiquiti Networks to your compatible router or network switch. Supporting over 300 concurrent connections with 4×4 MIMO with 160 MHz channels, this 802.11ax dual-band access point can transfer up to 5373 Mb/s over the 2.4 GHz and 5 GHz frequencies for smooth video streaming, file transfer, and internet browsing. You can also isolate guest traffic to ensure optimal security and speed. Its power-over-Ethernet (PoE) compliant Gigabit Ethernet port allows you to transfer both data and power over a single cable with compatible devices. Use the UniFi Network application to set up, configure, and manage your network connections. This access point is IP54 rated to withstand dust and water. A wall and ceiling mounting kit is included.
TECHNICAL SPECIFICATIONS:
Hardware
Networking interface: (1) GbE RJ45 port
Management interface:
– Ethernet
– Bluetooth
Power method: PoE
Power supply:
– UniFi PoE switch
– PoE adapter (Not included)
Supported voltage range: 44 57V DC
Max. power consumption: 13W
Max. TX power
– 2.4 GHz: 22 dBm
– 5 GHz: 26 dBm
– 6 GHz:
MIMO
– 2.4 GHz: 2 x 2 (UL MU-MIMO)
– 5 GHz: 4 x 4 (DL/UL MU-MIMO)
– 6 GHz:
Throughput rate
– 2.4 GHz: 573.5 Mbps
– 5 GHz: 4.8 Gbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 4 dBi
– 5 GHz: 6 dBi
– 6 GHz: ?
LEDs: White/blue
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -30 to 60? C (-22 to 140? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11a/b/g/n/ac/ax
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 350+
Zero wait DFS: Yes* *Supported with upcoming firmware versionsSKU: UBIQUITI - U6-PRO-US$297.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-FlexHD-US Access Point FlexHD
0 out of 5(0)Small and weatherproof, the UniFi FlexHD Access Point from Ubiquiti Networks is a Wave 2 access point with 4×4 MU-MIMO technology. Utilizing Wi-Fi 5 (802.11ac) technology, the FlexHD can use 5 GHz (for up to 1.7733 Gb/s) and 2.4 GHz (300 Mb/s) frequency bands indoors and outdoors thanks to its weatherproof design. The FlexHD can be mounted in a variety of ways, such as on a tabletop, wall, or a pole. The FlexHD also works with the UniFi Network Controller, allowing for scalability. This means it can be used to build wireless networks as big or as small as needed, all in a unified management system.
Wi-Fi 5 (802.11ac)
Utilizing Wi-Fi 5 (802.11ac) MU-MIMO technology, the FlexHD can communicate with multiple clients at the same time, which significantly increasing multi-user throughput and improving overall user experience.MU-MIMO
As a Wave 2 AP, the FlexHD provides increase wireless performance and/or serves more clients over a Wave 1 AP. A 4×4 Wave 2 AP delivers data to up to 33% more clients than a Wave 1 AP that is 3×3 in both 2.4 GHz and 5 GHz frequency bands.UniFi Network Controller
The FlexHD is scalable with the UniFi Network Controller. You’ll be able to manage UniFi devices, map out networks, manage system traffic, and more.Flexible Mounting Options
The FlexHD supports a variety of mounting options, such as tabletop, wall, pole, and even ceiling (ceiling mount available separately).SKU: UBIQUITI - UAP-FLEXHD-US$307.99 -
Wifi Extenders & Access Points
Ubiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
Wifi Extenders & Access PointsUbiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
0 out of 5(0)The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)SKU: UBIQUITI - UAP-AC-LR-US$194.99
There are no reviews yet.