Ubiquiti – UAP-AC-LR-US Long Range 802.11ac Dual-Band Wireless Access Point Gigabit PoE
$194.99
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
The Ubiquiti UAP-AC-LR-5-US is a UniFi Access Point Enterprise Wi-Fi System. It supports 802.11ac Wi-Fi standard with up to 867 Mb/s in speed at 5GHz. By utilizing 2 x 2 (5GHz) or 3 x 3 (2.4GHz) MIMO technology, the system can operate a dual band use. This device has a long range of 600′. It can be easily mounted on walls or ceiling as needed. The wi-fi network can be easily administered through a web browser. This administration aspect comes with map loading and numerous security options.
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max.TX power:
– 2 GHz: 24 dBm
– 5 GHz: 22 dBm
– 6 GHz:
MIMO:
– 2.4 GHz: 3 x 3
– 5 GHz: 2 x 2
– 6 GHz:
Throughput rate
– 2.4 GHz: 450 Mbps
– 5 GHz: 867 Mbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 3 dBi
– 6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC
Software
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
Related Products
Related products
-
Wifi Extenders & Access Points
Ubiquiti – LocoM5(US) UISP airMAX NanoStationM 5 GHz loco Station
With the 5 GHz airMAX NanoStationlocoM from Ubiquiti Networks, you can provide your clients with reliable long-range network connections. Designed to support both Point-to-MultiPoint (PtMP) and Point-to-Point (PtP) configurations, this Customer Premises Equipment (CPE) loco station features a panel antenna with dual-polarity 13 dBi gain to communicate with wireless devices over the 5 GHz signal band frequency. It also includes a 560 MHz Atheros MIPS 74Kc processor with 64MB of DDR2 memory and 8MB of flash storage, which can all be powered by connecting the included power-over-Ethernet (PoE) adapter to the 10/100 Mb/s Ethernet port to carry both data and power over a single cable. With its UV-stabilized plastic enclosure, the airMAX NanoStationloco M2 may be attached onto a pole with the included mount. Use the airOS software to configure and manage the airMAX NanoStationlocoM and its connected devices.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) 10/100 MbE RJ45 port
Power method: Passive PoE (Pairs 4, 5+; 7, 8 return)
Power supply: PoE, 24V, 0.5A
Max. power consumption: 5.5W
Ambient operating temperature: -30 to 75? C (-22 to 167? F)
Ambient operating humidity: 5 to 95% noncondensing
Shock & vibration: ETSI300-019-1.4
Certifications: FCC, IC, CE, RoHSSystem
Frequency: 5 GHz
Operating frequency:
– Worldwide: 5170-5875 MHz
– US: 5725-5850 MHz
– USA DFS: 5250-5850 MHz
Gain: 13 dBi
Cross-pol isolation: 20 dB Min.
Max. VSWR: 1.4:1
Beamwidth: 45? (H-pol) / 45? (V-pol) / 45? (Elevation)
Polarization: Dual linearSKU: UBIQUITI - LOCOM5(US) -
Wifi Extenders & Access Points
Ubiquiti – U6-Pro-US UniFi6 Pro
Quickly expand your business’s network with strong and reliable wireless coverage by connecting the WiFi 6 Pro Dual-Band Access Point from Ubiquiti Networks to your compatible router or network switch. Supporting over 300 concurrent connections with 4×4 MIMO with 160 MHz channels, this 802.11ax dual-band access point can transfer up to 5373 Mb/s over the 2.4 GHz and 5 GHz frequencies for smooth video streaming, file transfer, and internet browsing. You can also isolate guest traffic to ensure optimal security and speed. Its power-over-Ethernet (PoE) compliant Gigabit Ethernet port allows you to transfer both data and power over a single cable with compatible devices. Use the UniFi Network application to set up, configure, and manage your network connections. This access point is IP54 rated to withstand dust and water. A wall and ceiling mounting kit is included.
TECHNICAL SPECIFICATIONS:
Hardware
Networking interface: (1) GbE RJ45 port
Management interface:
– Ethernet
– Bluetooth
Power method: PoE
Power supply:
– UniFi PoE switch
– PoE adapter (Not included)
Supported voltage range: 44 57V DC
Max. power consumption: 13W
Max. TX power
– 2.4 GHz: 22 dBm
– 5 GHz: 26 dBm
– 6 GHz:
MIMO
– 2.4 GHz: 2 x 2 (UL MU-MIMO)
– 5 GHz: 4 x 4 (DL/UL MU-MIMO)
– 6 GHz:
Throughput rate
– 2.4 GHz: 573.5 Mbps
– 5 GHz: 4.8 Gbps
– 6 GHz:
Antenna gain
– 2.4 GHz: 4 dBi
– 5 GHz: 6 dBi
– 6 GHz: ?
LEDs: White/blue
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -30 to 60? C (-22 to 140? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11a/b/g/n/ac/ax
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 350+
Zero wait DFS: Yes* *Supported with upcoming firmware versionsSKU: UBIQUITI - U6-PRO-US -
Wifi Extenders & Access Points
Ubiquiti – UAP-AC-M-US Access Point AC Mesh
With the indoor/outdoor UAP-AC-M-US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti Networks, users benefit from a wide coverage area reaching up to 600′ along with enhanced data transfer rates of up to 867 Mb/s on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 2×2 MIMO internal antenna configuration supporting multiple data paths for a more efficient end-user network connection. Installation of the UAP-AC-M-US is simple, as it comes 802.3af PoE-compliant and includes a wall/pole/fast-mount kit. Once installed, users can take advantage of 802.11ac Wi-Fi access with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band. The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) GbE RJ45 port
Management interface:
– Ethernet
– Bluetooth
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply: Gigabit PoE adapter 24V, 0.5A*
Supported voltage range: 44?57V DC
Max. power consumption: 8.5W
Max. TX power
– 2.4 GHz: 20 dBm
– 5 GHz: 20 dBm
– 6 GHz: ?
MIMO
– 2.4 GHz: 2 x 2
– 5 GHz: 2 x 2
– 6 GHz: ?
Throughput rate
– 2.4 GHz: 300 Mbps
– 5 GHz: 867 Mbps
– 6 GHz: ?
Antenna gain
– 2.4 GHz: 3 dBi
– 5 GHz: 4 dBi
– 6 GHz: ?
Button: Factory reset
Mounting: Wall, pole, fast-mount (Included)
Ambient operating temperature: -30 to 70? C (-22 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, IC, UKCASoftware
WiFi standards: 802.11a/b/g/n/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
VLAN: 802.1Q
BSSID: Up to 4 per radio
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+SKU: UBIQUITI - UAP-AC-M-US -
Wifi Extenders & Access Points
Ubiquiti – UAP-AC-LITE-US UniFi Access Point Enterprise Wi-Fi System
The UAP-AC-LITE UniFi Access Point Enterprise Wi-Fi System from Ubiquiti Networks is a scalable enterprise access point solution designed to be easily deployed and managed. It supports the 802.11ac Wi-Fi standard with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band. The Wi-Fi system offers simultaneous dual band operation with 2 x 2 MIMO technology for each band. It has a range of up to 400′ and two Gigabit Ethernet ports. The PoE mode supports 802.3af/A PoE and 24V PoE. This UniFi Access Point (AP) has a sleek design and can be easily mounted to a ceiling tile or wall, using the included mounting hardware. The Wi-Fi system includes UniFi Controller software that can be installed on a Windows, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system. This access point comes with a PoE injector.
TECHNICAL SPECIFICATIONS
Hardware
Networking interface: (1) GbE RJ45 port
Management interface: Ethernet
Power method:
– PoE
– Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)
Power supply:
– UniFi PoE switch
– 24V, 0.5A Gigabit PoE adapter*
Max. power consumption: 6.5W
Max. TX power:
2.4 GHz: 20 dBm
5 GHz: 20 dBm
6 GHz:
MIMO:
2.4 GHz: 2 x 2
5 GHz: 2 x 2
6 GHz:
Throughput rate:
2.4 GHz: 300 Mbps
5 GHz: 867 Mbps
6 GHz:
Antenna gain:
2.4 GHz: 3 dBi
5 GHz: 3 dBi
6 GHz:
Button: Factory reset
Mounting: Wall, ceiling (Included)
Ambient operating temperature: -10 to 70? C (14 to 158? F)
Ambient operating humidity: 5 to 95% noncondensing
Certifications: CE, FCC, ICSoftware
WiFi standards: 802.11 a/b/g/n/r/k/v/ac
Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Power save: Supported
WMM: Voice, video, best effort, and background
Concurrent clients: 250+Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)SKU: UBIQUITI - UAP-AC-LITE-US
There are no reviews yet.