Product categories
-
Car Subwoofers & enclosures
DB Drive – SPF10D4 – 10 inch Dual 4-Ohm Shallow Subwoofer
“Unleash the Power of Bass with DB Drive’s SPF10D4 Speed Series Shallow Subwoofer – Feel the Beat, Feel the Heat!”
Introducing the DB Drive SPF10D4 Speed Series Shallow Subwoofer, the ultimate audio upgrade for your car! Get ready to experience deep, powerful bass like never before. With its 4 Layer VC featuring an aluminum former and a 40 oz. ferrite magnet, this subwoofer is designed to deliver maximum performance. The IMPP cone with foam surround ensures durability and precise sound reproduction, while the ultra-thin stamped steel frame design adds a sleek touch to your audio setup. With a maximum power of 1000 Watts and a nominal power of 300 Watts, this subwoofer will take your music to the next level. Upgrade your car audio system today with the DB Drive SPF10D4 Speed Series Shallow Subwoofer and enjoy an immersive audio experience on the road.
SPECIFICATIONS
Structure: 12″ (30.48cm) Woofer
Dynamic Power Handling: 1200 Watts
Nominal Power Handling: 600 Watts
Impedance: Dual 4Ω Voice CoilSKU: DB Drive - SPF10D4 -
Car Subwoofers & enclosures
DB Drive – SPW10D4 – 10in Dual 4-Ohm Subwoofer
The foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.
- 2″ (101.6mm) 4 Layer Voice Coil w/ KSV Former
- Vac PP Sub Cone Structure with Butyl rubber Surround
- Inverted Vac PP Dome
- Ferrite Oxide magnet
- Anti-resonant Stamped Steel frame
- High Carbon Steel top and bottom plates
- Poly-Cotton Dampeners
- Compression Speaker Terminal
SKU: DB Drive - SPW10D4 -
Car Subwoofers & enclosures
DB Drive – SPW12D4 – 12 inch Woofer 4 Ohm DVC
“Drive to New Depths of Sound with the DB Drive SPW12D4: Unleash the Power of Speed Series Subwoofers!”
Introducing the DB Drive SPW12D4: a powerhouse of sound that will take your audio experience to new heights. With its impressive features and cutting-edge technology, this 12-inch subwoofer from the SPEED SERIES SUBWOOFERS is designed to deliver unparalleled performance and clarity. The 4-layer voice coil and ferrite oxide magnet ensure optimal power handling, while the vac PP sub-cone structure with butyl rubber surround provides enhanced durability and deep bass response. The inverted vac PP dome and anti-resonant stamped steel frame further contribute to the exceptional sound quality. With a max power of 1250 watts and a nominal power of 600 watts, this subwoofer will elevate your music to a whole new level. Get ready to feel the bass like never before with the DB Drive SPW12D4. Upgrade your car audio system today and experience the true power of sound.
SKU: DB Drive - SPW12D4 -
Car Subwoofers & enclosures
DB Drive – WDX-AS10 – WDX 10 in. Active Subwoofer
Feel the power of sound, right under your seat!
Introducing the DB Drive WDX-AS10: WDX 10in Active Subwoofer, the epitome of compact power and convenience in the world of powered subwoofers. Designed to fit seamlessly under most seats, this subwoofer brings the thunderous bass you crave without compromising on space. With low-level RCA inputs and factory radio compatibility, installation is a breeze, while features like selectable audio sensing remote turn-on and phase shift adjustment from 0 to 180 degrees ensure you get the perfect sound every time. The remote gain control lets you fine-tune your audio experience, and the multi-fault protection circuitry ensures longevity and reliability. Powered by a robust MOSFET power supply, the WDX-AS10 is not just about performance, but also about sustainability. Elevate your driving experience with powerful, precise, and sustainable sound, all thanks to DB Drive!
SPECIFICATIONS
Structure: 10” (25.4cm) Woofer
Dynamic Power Handling: 900 Watts
Nominal Power Handling: 250 WattsSKU: DB Drive - WDX-AS10 -
Car Subwoofers & enclosures
JL Audio CLS113RG-W7AE Single 13W7AE 13″ 3000W Peak Power Handling Subwoofer with ProWedge Series Sealed Enclosure
Car Subwoofers & enclosuresJL Audio CLS113RG-W7AE Single 13W7AE 13″ 3000W Peak Power Handling Subwoofer with ProWedge Series Sealed Enclosure
Enclosed Subwoofer System with Single 13W7AE-D1.5 Subwoofer, Black Carpet (1500 W, Dual 1.5 Ω) – Sealed Enclosure
For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge system, in which the superb performance capabilities of the W7AE Subwoofer are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response… at any listening level.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13W7AE-D1.5 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle’s rear seat.
Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 500 – 1500W
Nominal Impedance: Dual 1.5 ΩSKU: JL Audio - CLS113RG-W7AE -
Car Subwoofers & enclosures
JL Audio – SB-GM-4GSUVCNSL/10TW1 Stealthbox for 2015-2020 Chevrolet / GMC Full-Size SUV’s with Front Bucket Seats and Factory Console
Car Subwoofers & enclosuresJL Audio – SB-GM-4GSUVCNSL/10TW1 Stealthbox for 2015-2020 Chevrolet / GMC Full-Size SUV’s with Front Bucket Seats and Factory Console
Stealthbox for 2015-2020 Chevrolet / GMC Full-Size SUV’s with Front Bucket Seats and Factory Console
The fourth generation full-size SUV from GM gets all-new, luxurious interiors, along with major enhancements in performance and technology. Unfortunately, the stock audio systems continue a track record of weak bass reproduction. There also isn’t much room for a conventional subwoofer design, without compromising people and cargo space.
To neatly solve this problem, our engineers have designed a subwoofer solution that installs invisibly, inside the factory console, with zero loss of console storage space.
This Stealthbox is equipped with a down-firing 10-inch TW1 thin-line subwoofer in a sealed enclosure design.
The Hard Data: Contains one 10TW1-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox installs inside forward-most portion of front center console, without affecting storage space or cup holders. Replaces the OEM “subwoofer” system, if vehicle is so equipped.
SKU: JL Audio - SB-GM-4GSUVCNSL/10TW1 -
Car Subwoofers & enclosures
JL Audio – 10TW1-4 10-inch Subwoofer Driver, 4 ohm
TW1 10-inch Subwoofer (300 W, 4 ohm)
Built on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
– Very shallow mounting depth (4.36 in / 111 mm)
– No pole vent: permits mounting close to rear wall of enclosure
– Extremely small sealed enclosure volume requirements
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Cast alloy frame with flat edges for tight driver grouping
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Steel mesh grille included with each driverSKU: JL AUDIO - 10TW1-4 -
Car Subwoofers & enclosures
JL Audio – 10TW3-D4 10-inch Subwoofer Driver, Dual 4 ohm
TW3 10-inch Subwoofer (400 W, dual 4 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented ?floating cone attach method? technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logo
– Precision-built in USA at JL Audio’s Miramar, Florida factory with global componentsSKU: JL AUDIO - 10TW3-D4 -
Car Subwoofers & enclosures
JL Audio – 10TW3-D8 10-inch Subwoofer Driver, Dual 8 ohm
TW3 10-inch Subwoofer (400 W, dual 8 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3?s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logoSKU: JL AUDIO - 10TW3-D8 -
Car Subwoofers & enclosures
JL Audio – 10W0V3-4 10-inch Subwoofer Driver, 4 ohm
W0v3 10-inch Subwoofer (300 W, 4 ohm)
The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our Elevated Frame Cooling design for enhanced power handling and reliability.
The 10W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure.
SKU: JL AUDIO - 10W0V3-4 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-2 10-inch Subwoofer Driver, 2 ohm
W1v3 10-inch Subwoofer (300 W, 2 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-2 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-2 -
Car Subwoofers & enclosures
JL Audio – 10W1V3-4 10-inch Subwoofer Driver, 4 ohm
W1v3 10-inch Subwoofer (300 W, 4 ohm)
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
SKU: JL AUDIO - 10W1V3-4
