No products in the cart.
Product categories
Filter by Brand
Product tags
Price range
Filter by price
Price Range
$ -
Product tags
- Converter Cables and Adapters
JL Audio – XMD-3.5MM-PNL 3.5 mm Audio Jack for Panel-Mounting
3.5 mm Audio Jack for Panel-Mounting
This panel-mount jack is perfect for creating a permanent connection point for a wide variety of portable audio sources. The jack accepts a 3.5 mm analog stereo plug and provides output via a pair of male RCA plugs.
This product is designed to be mounted to any flat surface up to 1-inch thick. Mounting requires a 0.75-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 20 in (0.51 m).
SKU: n/a - Breakers
JL Audio – XMD-MCB-30 Waterproof, Ignition Protected Circuit Breaker: 30 Amp
Waterproof, Ignition Protected Circuit Breaker: 30 Amp
- Manual Reset Design with High-Visibility Switch
Eliminates the need to replace blown fuses - IP67 Rated
Withstands immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected
Suitable for use in marine engine compartments and fuel tank spaces - Corrosion-Resistant Connection Points
Stainless steel M6 x 1 mm threaded studs engineered for real marine applications
SKU: JL Audio - XMD-MCB-30 - Manual Reset Design with High-Visibility Switch
- Breakers
JL Audio – XMD-MCB-40 Waterproof, Ignition Protected Circuit Breaker: 40 Amp
Waterproof, Ignition Protected Circuit Breaker: 40 Amp
- Manual Reset Design with High-Visibility Switch
Eliminates the need to replace blown fuses - IP67 Rated
Withstands immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected
Suitable for use in marine engine compartments and fuel tank spaces - Corrosion-Resistant Connection Points
Stainless steel M6 x 1 mm threaded studs engineered for real marine applications
SKU: JL Audio - XMD-MCB-40 - Manual Reset Design with High-Visibility Switch
- Breakers
JL Audio – XMD-MCB-50 Waterproof, Ignition Protected Circuit Breaker: 50 Amp
Waterproof, Ignition Protected Circuit Breaker: 50 Amp
- Manual Reset Design with High-Visibility Switch
Eliminates the need to replace blown fuses - IP67 Rated
Withstands immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected
Suitable for use in marine engine compartments and fuel tank spaces - Corrosion-Resistant Connection Points
Stainless steel M6 x 1 mm threaded studs engineered for real marine applications
SKU: JL Audio - XMD-MCB-50 - Manual Reset Design with High-Visibility Switch
- Breakers
JL Audio – XMD-MCB-60 Waterproof, Ignition Protected Circuit Breaker: 60 Amp
Waterproof, Ignition Protected Circuit Breaker: 60 Amp
- Manual Reset Design with High-Visibility Switch
Eliminates the need to replace blown fuses - IP67 Rated
Withstands immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected
Suitable for use in marine engine compartments and fuel tank spaces - Corrosion-Resistant Connection Points
Stainless steel M6 x 1 mm threaded studs engineered for real marine applications
SKU: JL Audio - XMD-MCB-60 - Manual Reset Design with High-Visibility Switch
- Breakers
JL Audio – XMD-MCB-80 Waterproof, Ignition Protected Circuit Breaker: 80 Amp
Waterproof, Ignition Protected Circuit Breaker: 80 Amp
- Manual Reset Design with High-Visibility Switch
Eliminates the need to replace blown fuses - IP67 Rated
Withstands immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected
Suitable for use in marine engine compartments and fuel tank spaces - Corrosion-Resistant Connection Points
Stainless steel M6 x 1 mm threaded studs engineered for real marine applications
SKU: JL Audio - XMD-MCB-80 - Manual Reset Design with High-Visibility Switch
- Installation Kit
JL Audio – XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery
Installation KitJL Audio – XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery
Premium 9 AWG 12-Volt Power Connection System for Single Amplifier – 30A Maximum
Ideal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 12 feet (3.7 m) from battery, or closer
This kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included MAXI® Fuse and Fuse Holder. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
- Red 9 AWG Tinned Power Wire (with one Power Ring) – 2 ft (0.6 m)
- Red 9 AWG Tinned Power Wire (unterminated) – 10 ft (3 m)
- Yellow 9 AWG Tinned Ground Wire (with one Power Ring) – 12 ft (3.7 m)
- Blue 16 AWG Remote Turn-On Wire – 18 ft (5.5 m)
- 30 Amp MAXI® Fuse and Fuse Holder – XD-MFBW-MAXI
- Four 4-inch wire tires
- 4mm hex wrench
SKU: JL Audio - XMD-PCS30A-1-L12 - Installation Kit
JL Audio – XMD-PCS50A-1-L10 Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 10 ft of Battery
Installation KitJL Audio – XMD-PCS50A-1-L10 Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 10 ft of Battery
Premium 6 AWG 12-Volt Power Connection System for Single Amplifier – 50A Maximum
Ideal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 10 feet (3 m) from battery, or closer
This kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
- Red 6 AWG Tinned Power Wire (with two Power Rings) – 2 ft (0.6 m)
- Red 6 AWG Tinned Power Wire (with one Power Ring) – 8 ft (2.4 m)
- Yellow 6 AWG Tinned Ground Wire (with one Power Ring) – 10 ft (3 m)
- Blue 16 AWG Remote Turn-On Wire – 18 ft (5.5 m)
- 50 Amp Marine Circuit Breaker – XMD-MCB-50
– Manual Reset Design with High-Visibility Switch (no fuses to blow)
– IP67 Rated: withstands full immersion in water up to 1 meter deep
– SAE J1171 External Ignition Protected: suitable for use in marine engine compartments and fuel tank locations
– Stainless steel connection points for corrosion-resistance
SKU: JL Audio - XMD-PCS50A-1-L10 - Installation Kit
JL Audio – XMD-PCS50A-1-L20 Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 20 ft of Battery
Installation KitJL Audio – XMD-PCS50A-1-L20 Premium 6 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 20 ft of Battery
Premium 6 AWG 12-Volt Power Connection System for Single Amplifier – 50A Maximum
Ideal for most Runabouts and Cruisers where amplifier location is 10-20 feet (3-6 m) from battery, or closer
Everything you need to make secure, high-integrity power connections to a single amplifier with up to a 50A fuse rating. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
- Red 6 AWG Tinned Power Wire (with two Power Rings) – 2 ft (0.6 m)
- Red 6 AWG Tinned Power Wire (with one Power Ring) – 18 ft (5.5 m)
- Yellow 6 AWG Tinned Ground Wire (with one Power Ring) – 20 ft (6.1 m)
- Blue 16 AWG Remote Turn-On Wire – 18 ft (5.5 m)
- 50 Amp Marine Circuit Breaker – XMD-MCB-50
– Manual Reset Design with High-Visibility Switch (no fuses to blow)
– IP67 Rated: withstands full immersion in water up to 1 meter deep
– SAE J1171 External Ignition Protected: suitable for use in marine engine compartments and fuel tank locations
– Stainless steel connection points for corrosion-resistance
SKU: JL Audio - XMD-PCS50A-1-L20 - Cables
JL Audio – XMD-USB/3.5MM-PNL Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
This panel-mount combination jack facilitates the creation of a permanent connection point for a wide variety of portable audio sources, including USB-compatible digital music players, thumb drives and smartphones. The jack accepts a 3.5 mm stereo plug for analog audio signals, providing output via a pair of male RCA plugs. A separate 9-wire USB Type A jack is provided for connection and charging of digital devices, outputting via a male USB Type A connector (USB 2.0 and USB 3.0-compatible). An appropriate USB cable for your device is required to make the input connection.
This product is designed to be mounted to any flat surface up to 1-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
SKU: n/a - Converter Cables and Adapters
JL Audio – XMD-USB/3.5MM-PNL Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
Converter Cables and AdaptersJL Audio – XMD-USB/3.5MM-PNL Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
This panel-mount combination jack facilitates the creation of a permanent connection point for a wide variety of portable audio sources, including USB-compatible digital music players, thumb drives and smartphones. The jack accepts a 3.5 mm stereo plug for analog audio signals, providing output via a pair of male RCA plugs. A separate 9-wire USB Type A jack is provided for connection and charging of digital devices, outputting via a male USB Type A connector (USB 2.0 and USB 3.0-compatible). An appropriate USB cable for your device is required to make the input connection.
This product is designed to be mounted to any flat surface up to 1-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
SKU: JL Audio - XMD-USB/3.5MM-PNL - Converter Cables and Adapters
JL Audio – XMD-USB/3.5MM-PNL Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
Converter Cables and AdaptersJL Audio – XMD-USB/3.5MM-PNL Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting
This panel-mount combination jack facilitates the creation of a permanent connection point for a wide variety of portable audio sources, including USB-compatible digital music players, thumb drives and smartphones. The jack accepts a 3.5 mm stereo plug for analog audio signals, providing output via a pair of male RCA plugs. A separate 9-wire USB Type A jack is provided for connection and charging of digital devices, outputting via a male USB Type A connector (USB 2.0 and USB 3.0-compatible). An appropriate USB cable for your device is required to make the input connection.
This product is designed to be mounted to any flat surface up to 1-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.
Overall cable length, 6 ft (1.83 m).
SKU: n/a
