No products in the cart.
JL Audio – XD-RT2-4PAK Four 2 AWG Crimpablc Ring Terminals with two red & two black insulators
$34.99
Crimpable power rings are made of pure copper construction with marine-grade stannum-plating to resist corrosion. They include two red and two black insulator sleeves. Sold in packs of four.
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
Crimpable power rings are made of pure copper construction with marine-grade stannum-plating to resist corrosion. They include two red and two black insulator sleeves. Sold in packs of four.
General Features:
- Malleable, pure copper construction
- Marine-grade stannum plating to resist corrosion
- Two red and two black insulator sleeves are included
Brand
JL Audio
Related Products
Related products
- Car and Marine Accessories
JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
SKU: JL Audio - MVi-DRCADAPT - Car and Marine Accessories
JL Audio – MVi-HUB JLid Comm & Network Bridge Hub for MVi Amplifiers
JLid Comm & Network Bridge Hub for MV & MVi Amplifiers
The MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.
A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS or Android device with the TüN Mobile App.
For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)
MVi-HUB includes the following features:
- JLid-COMM Connections: 1 Master Input / 5 Slave Outputs
- JLid-CTRL Connections: 1 Accessory Port
- Amp Identifier Status LEDs
- Powered via JLid connection to MVi amplifiers
SKU: JL Audio - MVi-HUB - Car and Marine Accessories
JL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
Car and Marine AccessoriesJL Audio – MMR-40 Wired, Full-Function NMEA 2000 Network Controller with Full-Color LCD Display for use with MediaMaster
Full-function, NMEA 2000 network wired remote controller with full color LCD display
The MMR-40 is a NMEA 2000 Network Controller engineered to add full-function, auxiliary control to MediaMaster source units.
Outfitted with a NMEA 2000 Micro-C connector, the MMR-40 connects to a host MediaMaster source unit in two ways:
- Direct interface with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included)
- Direct connection of one MMR-40 with one host MediaMaster source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000 network
Once connected, the MMR-40 automatically recognizes the host MediaMaster source unit and will then mirror all host source unit controls and screen info onto the MMR-40’s full-color, 2.8-inch LCD display, resulting in a complete MediaMaster user experience.
The MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments.
The MMR-40 includes the following features:
- NMEA 2000 Certified (LEN 4)
- Easy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls
- Independent day/night display themes and lighting controls
- IP66 rated for real marine duty
- Protective Sun Cover included
Note: The MMR-40 is not a stand-alone receiver and does not function without a connected MediaMaster source unit. All remote control functionality of the MMR-40 is solely derived from the host source unit. Functionality of the MMR-40 requires connection to a NMEA 2000 network or use of MMC-PN2K powered network cables (sold separately).
SKU: JL Audio - MMR-40
