No products in the cart.
JL Audio – M-DRC-50 Digital Preset Controller for JLid compatible products
$129.99
Digital Preset Controller for JLid compatible products
The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid port of compatible JL Audio electronics.
Features:
- Provides easy, push-button selection of stored DSP presets for compatible JL Audio electronics
- Built-in RGB LED indicator displays selected preset by color
- Weatherproof construction (IP66 rated, from the front, when properly installed)
- One-hole mount design accommodates panels up to 3/4″ (19 mm) thick
- 18 ft. (5.5 m) control cable included, with protective connection sleeve
- Powered via the JLid connection; separate power wiring is not needed.
The M-DRC-50 is compatible with the following JL Audio products:
MVi-HUB: Connects to the JLid COMM Port
MVi Amplifiers*: Connects to the JLid COMM Port
*Not compatible with mono MV amplifiers.
Digital Preset Controller for JLid compatible products
The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid port of compatible JL Audio electronics.
Features:
- Provides easy, push-button selection of stored DSP presets for compatible JL Audio electronics
- Built-in RGB LED indicator displays selected preset by color
- Weatherproof construction (IP66 rated, from the front, when properly installed)
- One-hole mount design accommodates panels up to 3/4″ (19 mm) thick
- 18 ft. (5.5 m) control cable included, with protective connection sleeve
- Powered via the JLid connection; separate power wiring is not needed.
The M-DRC-50 is compatible with the following JL Audio products:
MVi-HUB: Connects to the JLid COMM Port
MVi Amplifiers*: Connects to the JLid COMM Port
*Not compatible with mono MV amplifiers.
Brand
JL Audio
Related Products
Related products
- Remote Level Control
JL Audio – CL-RLC Remote Level Control / Line Driver
Fully Active, 2-ch. Remote Level Control / Line Driver with Pass-through Outputs
The Possibilities are Endless…
The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
SKU: JL Audio - CL-RLC - Remote Level Control
JL Audio – HD-RLC Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All modelsWhen the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
SKU: JL Audio - HD-RLC - Remote Level Control
JL Audio – RBC-1 Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JD-Series: JD250/1, JD500/1, JD1000/1
JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:
PowerWedge+: All Models
MicroSub+: All ModelsWhen the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600When the RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
SKU: JL Audio - RBC-1 - Remote Level Control
JL Audio – MMR-25W Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
Remote Level ControlJL Audio – MMR-25W Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
Wireless Remote Controller with Bluetooth Technology for use with MediaMaster
Outfitted with ultra-efficient, Bluetooth Low Energy technology, the MMR-25W controller delivers convenient handheld command of your MediaMaster source unit (MM105 or MM105-HR), from up to 35 feet (11 m) away.
Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones. Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle’s simplistic design permits installation on any flat surface. A replaceable 3V (CR2032) battery is also included. Up to eight remotes* can be directly paired to a single source unit (additional remotes sold separately).
* Includes total capacity of ALL paired Bluetooth devices (remote controllers, app controllers, streaming sources, etc.).
MediaMaster MMR-25W remote control functions (source dependent) include:
- Power On/Off
- Source Selection
- Audio Zone Selection/Lock
- Volume Up/Down
- Track Up/Down
- Track Fast-Forward/Fast-Rewind
- Favorite Up/Down
- Tuner Seek Up/Down
- Play/Pause
- Mute/Unmute
SKU: JL Audio - MMR-25W
