No products in the cart.
JL Audio PES110-TW1-4 StowAway sealed downward-firing enclosure with one 10TW1-4 4-ohm shallow-mount subwoofer
$799.99
Enclosed Subwoofer System with Single 10TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
- Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
- Recommended amplifier power: 75–300 watts
- Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
GENERAL SPECIFICATIONS
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
PHYSICAL SPECIFICATIONS
| Height (H) | 7.0 in / 178 mm |
| Width (W) | 18.0 in / 457 mm |
| Depth (D) | 12.5 in / 318 mm |
| Mounting Location Depth (A) | 10.66 in / 271 mm |
| Mounting Location Width (B) | 16.16 in / 410 mm |
Enclosed Subwoofer System with Single 10TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
- Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
- Recommended amplifier power: 75–300 watts
- Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
GENERAL SPECIFICATIONS
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
PHYSICAL SPECIFICATIONS
| Height (H) | 7.0 in / 178 mm |
| Width (W) | 18.0 in / 457 mm |
| Depth (D) | 12.5 in / 318 mm |
| Mounting Location Depth (A) | 10.66 in / 271 mm |
| Mounting Location Width (B) | 16.16 in / 410 mm |
Brand
JL Audio
Related Products
Related products
- Car Subwoofers & enclosures
JL Audio – 15W0V3-4 15-inch Subwoofer Driver, 4 ohm
W0v3 15-inch Subwoofer (500 W, 4 ohm)
Sometimes, bigger is better… For these situations, the 15W0v3 offers excellent excursion capability, linearity and an overall performance envelope that puts it right at the top of its price class. It features a very beefy 2.5 in. diameter voice coil and our Elevated Frame Cooling design for enhanced power handling and reliability.
The 15W0v3 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a moderately sized 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.75 cu. ft. (77.88 l) ported enclosure.
SKU: JL AUDIO - 15W0V3-4 - Car Subwoofers & enclosures
JL Audio – 10W3v3-2 10-inch Subwoofer Driver, 2 ohm
W3v3 10-inch Subwoofer (500 W, 2 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-2 - Car Subwoofers & enclosures
JL Audio – 10TW1-4 10-inch Subwoofer Driver, 4 ohm
TW1 10-inch Subwoofer (300 W, 4 ohm)
Built on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
– Very shallow mounting depth (4.36 in / 111 mm)
– No pole vent: permits mounting close to rear wall of enclosure
– Extremely small sealed enclosure volume requirements
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Cast alloy frame with flat edges for tight driver grouping
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Steel mesh grille included with each driverSKU: JL AUDIO - 10TW1-4 - Car Subwoofers & enclosures
JL Audio – 10TW3-D8 10-inch Subwoofer Driver, Dual 8 ohm
TW3 10-inch Subwoofer (400 W, dual 8 ohm voice coils)
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a concentric tube structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3?s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
– Very shallow mounting depth (3.25 / 3.50 Inches)
– No pole vent: permits mounting close to rear wall of enclosure.
– Very small sealed enclosure volume requirements
– Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
– DMA-optimized motor designs
– concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Aluminum-alloy dust cap and rear cap with JL Audio logoSKU: JL AUDIO - 10TW3-D8
