JL Audio PES112-TW1-4 StowAway sealed downward-firing enclosure with one 12TW1-4 4-ohm shallow-mount subwoofer
$899.99
Enclosed Subwoofer System with Single 12TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
Recommended amplifier power: 75–300 watts
Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
| Height (H) | 8.23 in / 209 mm |
| Width (W) | 21.78 in / 553 mm |
| Depth (D) | 15.16 in / 385 mm |
| Mounting Location Depth (A) | 12.66 in / 322 mm |
| Mounting Location Width (B) | 19.29 in / 490 mm |
Enclosed Subwoofer System with Single 12TW1-4 Subwoofer, Black Texture Finish (300 watts, 4 ohms)
StowAway subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.
Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with “off-the-floor” installations or in tight spaces where access is limited.
The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.
Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer
Recommended amplifier power: 75–300 watts
Nominal Impedance: 4 ohms
Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.
| Continuous Power Handling (RMS) | 300 W |
| System Nominal Impedance | 4 Ω |
| Enclosure Type | Sealed |
| Finish | Black Texture |
| Grille Included | Yes |
| Height (H) | 8.23 in / 209 mm |
| Width (W) | 21.78 in / 553 mm |
| Depth (D) | 15.16 in / 385 mm |
| Mounting Location Depth (A) | 12.66 in / 322 mm |
| Mounting Location Width (B) | 19.29 in / 490 mm |
Brand
JL Audio
Related Products
Related products
-
Car Subwoofers & enclosures
JL Audio – 12TW1-4 12-inch Subwoofer Driver, 4 ohm
TW1 12-inch Subwoofer (300 W, 4 ohm)
Built on JL Audio’s patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.65 cu.ft. / 18.4 liters). This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 12TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
– Very shallow mounting depth (4.62 in / 117 mm)
– No pole vent: permits mounting close to rear wall of enclosure
– Extremely small sealed enclosure volume requirements
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Cast alloy frame with flat edges for tight driver grouping
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Steel mesh grille included with each driverSKU: JL AUDIO - 12TW1-4 -
Car Subwoofers & enclosures
JL Audio – 13TW5V2-4 13.5-inch Subwoofer Driver, 4 ohm
TW5v2 13.5-inch Subwoofer (600 W, 4 ohm)
We couldn’t leave the ultimate thin woofer alone… we had to make it even better.
Our patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a concentric tube structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.
To unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.
In keeping with its ?tight-spaces? mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.
The 13TW5v2 is best used with amplifier power in the 250W – 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure.
Never has such high-quality sub-bass been possible in the most challenging installation applications.
SKU: JL AUDIO - 13TW5V2-4 -
Car Subwoofers & enclosures
JL Audio – 10W3V3-4 10-inch Subwoofer Driver, 4 ohm
W3v3 10-inch Subwoofer (500 W, 4 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-4 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-4 -
Car Subwoofers & enclosures
JL Audio – 10W3v3-2 10-inch Subwoofer Driver, 2 ohm
W3v3 10-inch Subwoofer (500 W, 2 ohm)
This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
SKU: JL AUDIO - 10W3V3-2
