JL Audio – MMA-1-HTML NMEA 2000 Network, MFD Data Interface for use with MediaMaster
$499.99
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
NMEA 2000 Network, MFD Data Interface for MediaMaster MM105 & MM105-HR
The MMA-1-HTML is a NMEA 2000 certified data interface engineered to generate MediaMaster themed UI navigation and controls directly onto your vessel’s compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster seamlessly, via your helm’s MFD display.
Outfitted with a NMEA 2000 Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel’s NMEA 2000 network using applicable NMEA 2000 cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster source unit and will then project its familiar screen info and navigation controls onto your MFD’s display, resulting in a true MediaMaster user experience.
Compatible source unit models: MM105, MM105-HR, MM55, MM55-HR
Note: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000 network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000 network.
Brand
JL Audio
Related Products
Related products
-
Car and Marine Accessories
JL Audio – XB-BTU Universal Battery Connector, Positive or Negative
High-Capacity Universal Battery Connector, Positive or Negative
The XB-BTU Battery Connector is ideal for larger systems that require multiple power wire connections at the battery. It is capable of receiving 1/0 AWG, 2 AWG, 4 AWG or 8 AWG wire in each of its three captured-wire connection points (in any combination). OmniSert technology ensures secure, high-integrity wire contact. Multiple bushings are included to dress the wire exits, depending on the size wire used.
The included adaptor collar allows it to be used for negative or positive battery post connections, where the secure clamping design ensures a tight fit to the battery post. Adaptors are sold separately for side-post batteries.
We also include a “factory harness adaptor”, which can be installed in one of the three wire connections to accept power rings and most factory harness battery terminations.
360 forged and machined brass construction with a high-temperature polycarbonate base and cover.
SKU: JL Audio - XB-BTU -
Car and Marine Accessories
JL Audio – MVi-DRCADAPT Rotary DRC Adaptor for MVi Amplifiers
Rotary DRC Adaptor for MVi Amplifiers
Add rotary DRC capabilities to MVi amplifiers with ease.
- Permits direct connection of a DRC-205 rotary controller (non-marine) to a MVi amplifier for convenient remote preset selection, with RGB LED reporting, and adjustment of level, fader and balance from the helm.
- Plugs directly to the JLid-COMM Port of a MVi amplifier
- Powered via the JLid connection… no separate power wiring is needed!
- Built-in multi-color LED reports condition and faults
Notes: Not compatible with mono MV amplifiers or the MVi-HUB. This product is not needed for connection of the M-DRC-50 push-button controller.
SKU: JL Audio - MVi-DRCADAPT -
Car and Marine Accessories
JL Audio – SBA-J-JLU-UAR 2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
Car and Marine AccessoriesJL Audio – SBA-J-JLU-UAR 2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
2018-Up Jeep Wrangler (JL) Unlimited and 2020-Up Jeep Gladiator (JT) Universal Amplifier Rack
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.
XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*
M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.
RD: All models, except RD1000/1, RD1500/1 and RD900/5.
MX: All models; up to two of MX280/4 and MX300/1.**
* includes XD versions
** includes HX and MHX versionsSKU: JL Audio - SBA-J-JLU-UAR -
Car and Marine Accessories
JL Audio – SBA-J-JL-FHB 2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
Car and Marine AccessoriesJL Audio – SBA-J-JL-FHB 2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
2018-Up Jeep Wrangler (JL) and 2020-Up Jeep Gladiator (JT) Fuse Holder Bracket
The SBA-J-JL-FHB Fuse Holder Bracket is designed to securely mount up to two JL Audio XB-MFBU-ANL Master ANL Fuse Blocks (sold separately). Engineered and Built in USA, the SBA-J-JL-FHB Fuse Holder Bracket requires no drilled holes and installs using factory hardware.
The Hard Data: Attaches to the vehicle’s firewall using factory hardware. Fits 2-Door or 4-Door models. Will not fit Rubicon 392 or models equipped with the EcoDiesel engine.
Will not fit any 2018 “JK” Jeep models.
SKU: JL Audio - SBA-J-JL-FHB
