JL Audio – M400/4 4 Ch. Class D Full-Range Marine Amplifier, 400 W
$549.00
4-Channel Class D Marine Full-Range Amplifier, 100 W x 4 @ 2 ohm / 75 W x 4 @ 4 ohm – 14.4V
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ? (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
Use the M400/4 in combination with our M600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer… and fit the whole thing under a seat. Or, use the M400/4 by itself to power two satellites, plus a subwoofer. With M-Series amplifier, the possibilities are endless.
The M400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s Ch. 1 & 2 level or overall level can be directly controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
4-Channel Class D Marine Full-Range Amplifier, 100 W x 4 @ 2 ohm / 75 W x 4 @ 4 ohm – 14.4V
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ? (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
Use the M400/4 in combination with our M600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer… and fit the whole thing under a seat. Or, use the M400/4 by itself to power two satellites, plus a subwoofer. With M-Series amplifier, the possibilities are endless.
The M400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s Ch. 1 & 2 level or overall level can be directly controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Related Products
Related products
-
Marine Amplifiers, Marine Speakers
JL Audio – SLPK-YA-19FXC-Gm SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
Marine Amplifiers, Marine SpeakersJL Audio – SLPK-YA-19FXC-Gm SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
SlamPak Audio System for 2019-2021 Yamaha FX WaveRunner
Elevate your audio adventures with this exclusive SlamPack system made for Yamaha’s latest FX WaveRunner.
This system includes a pair of weatherproof VEX pods with 6.5-inch marine coaxial speakers and a compact, 600W marine system amplifier. The MBT-CRXv2 Bluetooth controller/receiver wirelessly connects to your compatible device for handsfree streaming of your favorite audio tracks. Also includes marine-grade mounting hardware and model specific wiring. Can be combined with the optional JL Audio FX Subwoofer kit (sold separately) for the ultimate PWC experience.
This SlamPak includes:
1 pr. VEX Speaker Systems with M3-650X-S-Gm 6.5-inch Marine Coaxial Speakers
1 ea. MX600/3 3-Channel Class D Marine System Amplifier*
1 ea. MBT-CRXv2 Weatherproof Bluetooth® Audio Controller/Receiver
All System Wiring and Hardware*Note: For optimum performance and reliability, all amplifier controls have been preset for this SlamPak and sealed beneath the control panel cover. No further adjustment is necessary.
Yamaha Part Number: MWV-JLVXA-BK-18
SKU: JL Audio - SLPK-YA-19FXC-Gm -
Marine Amplifiers
JL Audio MX280/4 Compact marine/powersports 4-channel amplifier — 50 watts RMS x 4
4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω – 14.4V
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
SKU: JL Audio-MX280/4 -
Car Amplifiers, Marine Amplifiers
JL Audio XDM500/3 3-channel car/marine amplifier — 75 watts RMS x 2 at 4 ohms + 300 watts RMS x 1 at 2 ohms
Car Amplifiers, Marine AmplifiersJL Audio XDM500/3 3-channel car/marine amplifier — 75 watts RMS x 2 at 4 ohms + 300 watts RMS x 1 at 2 ohms
3-Channel Class D Car/Marine System Amplifier, 75 W x 2 @ 4 Ω + 300 W x 1 @ 2 Ω – 14.4V
Small enough to fit in just about any tight space application, the XDM500/3 is the perfect amplifier for a simple audiophile-grade, subwoofer / satellite system. With its three channels of versatile output, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The technology that makes this much power possible in such a small chassis is our advanced NexD switching amplifier design.
Suitable for car or boat installations, the XDM500/3 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM500/3 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver’s seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL Audio-XDM500/3 -
Car Amplifiers, Marine Amplifiers
JL AUDIO – XDM600/1 Mono car/marine subwoofer amplifier 600 watts RMS x 1 at 2 ohms
Car Amplifiers, Marine AmplifiersJL AUDIO – XDM600/1 Mono car/marine subwoofer amplifier 600 watts RMS x 1 at 2 ohms
Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 ohm / 400 W x 1 @ 4 ohm – 14.4V
This potent monoblock amplifier employs our high-speed NexD switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don’t let its small size fool you, though… the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
SKU: JL AUDIO - XDM600/1
There are no reviews yet.